*mydirectindustry

VLX-60

Product catalog summary

Overview: The VLX-60 is part of the VLX series of Electric Encoders™ by Netzer Precision, designed for industrial automation applications. It features a low profile, hollow shaft, and no contact elements, ensuring high precision and reliability under various conditions.

Key Features:

Low profile (<10 mm) and lightweight design.
High resolution and precision with tolerance to temperature extremes, shock, moisture, EMI, RFI, and magnetic fields.
Digital interfaces for absolute position measurement.

Mechanical Specifications:

Allowable mounting eccentricity and axial tolerance: ±0.1 mm.
Rotor inertia: 1,930 gr·mm²; Total weight: 14g.
Outer/Inner Diameter: 60/25 mm; Profile: 8 mm.
Material: FR4; Nominal air gap: 0.6 mm.

Electrical Specifications:

Supply voltage: 5V ± 5%; Current consumption: 90 mA.
Interconnection via connector.

Environmental Specifications:

Operating temperature: -25°C to +65°C; Storage temperature: -40°C to +100°C.
Relative humidity: 98% non-condensing; Shock endurance: 100 g for 11 ms.
Vibration endurance: 20 g 10 – 2000 Hz; Protection: IP 40.

General Specifications:

Angular resolution: 18-20 bit; Maximum static error: ±0.015°.
Maximum operational speed: 4,000 rpm; Measurement range: Single turn, unlimited.
Rotation direction adjustable CW/CCW.

Interface and Communication:

BiSS-C and SSi interfaces for digital data transmission.
Clock frequency: 0.1 - 5.0 MHz; Position update rate: 35 kHz (up to 375 kHz optional).
Advanced calibration and monitoring via Electric Encoder Explorer software.

Accessories and Ordering:

Optional demonstration kits available for SSi and BiSS interfaces.
Cable options include 30 AWG twisted pairs with specific temperature ratings and shielding.

Catalog excerpts

Precision Position Sensors ABSOLUTE POSITION ROTARY ELECTRIC ENCODER1" INDUSTRIAL AUTOMATION VLX-60 icore DATA SHEET The VLX-60 is a member of the VLX series of Electric Encoders™ a product line based on Netzer Precision Position Sensor proprietary technology. EE products are characterized by features that enable unparalleled performance: • Low profile (<10 mm) • Hollow shaft (Stator / Rotor) • No bearings or other contact elements • High resolution and unparalleled precision • High tolerance to temperature extremes, shock, moisture, EMI, RFI and magnetic fields • Very low weight • Holistic signal generation • Digital interfaces for absolute position General

Open the catalog to page 1

Precision Position Sensors ABSOLUTE POSITION ROTARY ELECTRIC ENCODER1" INDUSTRIAL AUTOMATION DATA SHEET Digital SSi Interface Synchronous Serial Interface (SSI) is a point to point serial interface standard between a master (e.g. controller) and a slave (e.g. sensor) for digital data transmission. Tr SSi / BiSS output signal parameters

Open the catalog to page 2

Precision Position Sensors ABSOLUTE POSITION ROTARY ELECTRIC ENCODER1" INDUSTRIAL AUTOMATION DATA SHEET Ordering Code Accessories - cables (optional) Cable Information SSi / BiSS Netzer Cat No.: CB 00014 Provider: Ray-0 USA. CAT No.: RQ 213210 Cable: 30 AWG twisted pair (3): 2 (30 AWG 25/44 tinned copper, Insulation: PFE 0 0.15 to 0 0.6 ± 0.05 OD). Temperature rating: -60 to +150 Deg C. Braided shield: Thinned copper braided 95% min. coverage. Jacket: 0.44 silicon rubber (NFA 11-A1) 03.45 ±0.2 OD 30 AWG twisted pairs (3) Braided shield Jacket 0.44mm 0 3.45 ±0.2 mm Related documents VLX-60 User...

Open the catalog to page 3

Precision Position Sensors ABSOLUTE POSITION ROTARY ELECTRIC ENCODER™ INDUSTRIAL AUTOMATION DATA SHEET pitch circle 0 for stator mounting Unless Otherwise Specified

Open the catalog to page 4

All Netzer Precision Position Sensors catalogs and technical brochures

Archived catalogs

VLP-100
4 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list