- Products
- Catalogs
- News & Trends
- Exhibitions
VLP-60
VLP-60
- Low profile (<6 mm) and lightweight (16 gr).
- High resolution (18-20 bit) and precision with a maximum static error of ±0.015°.
- Operational speed up to 4,000 rpm with a single turn measurement range.
- Temperature tolerance from -40°C to +85°C (operating) and -40°C to +125°C (storage).
- EMC compliance with IEC 6100-6-2 and IEC 6100-6-4 standards.
- Allowable mounting eccentricity and axial tolerance of ±0.1 mm.
- Rotor inertia of 1,930 gr·mm² and nominal air gap of 0.6 mm.
- Material: FR4 for both stator and rotor.
- Supply voltage of 5V ± 5% with current consumption <90 mA.
- Digital interfaces include SSi and BiSS-C with RS-422 standards.
- Advanced calibration and monitoring via Electric Encoder Explorer software.
- Shock endurance of 100 g for 11 ms and vibration endurance of 20 g from 10 to 2000 Hz.
- Protection level of IP 40 and relative humidity tolerance of 98% non-condensing.
- SSi and BiSS-C interfaces for digital data transmission.
- Standard interconnection with 250mm flying leads, with options for longer leads or connectors.
- Available resolutions: 18, 19, and 20 bits.
- Optional demonstration kits for SSi and BiSS interfaces.
Catalog excerpts
Precision Position Sensors ABSOLUTE POSITION ROTARY ELECTRIC ENCODER™ HARSH ENVIRONMENT VLP-60 icore DATA SHEET The VLP-60 is a member of the VLP series of Electric Encoders™ a product line based on Netzer Precision Position Sensor proprietary technology. EE products are characterized by features that enable unparalleled performance: • Low profile (<6 mm) • Hollow shaft (Stator / Rotor) • No bearings or other contact elements • High resolution and unparalleled precision • High tolerance to temperature extremes, shock, moisture, EMI, RFI and magnetic fields • Very low weight • Holistic signal generation • Digital interfaces for absolute position
Open the catalog to page 1
Precision Position Sensors ABSOLUTE POSITION ROTARY ELECTRIC ENCODER™ HARSH ENVIRONMENT VLP-60 icore DATA SHEET Digital SSi Interface SSi / BiSS output signal parameters Synchronous Serial Interface (SSi) is a point to point serial interface standard between a master (e.g. controller) and a slave (e.g. sensor) for digital data transmission. Output code Digital BiSS-C Interface BiSS - C Interface is unidirectional serial synchronous protocol for digital data transmission where the Encoder acts as “slave” transmits data according to “Master” clock. The BiSS protocol is designed in B mode and C...
Open the catalog to page 2
ABSOLUTE POSITION ROTARY ELECTRIC ENCODER HARSH ENVIRONMENT Ordering Code Green / Yellow Gray / Blue Resolution Code 0 250mm Flying leads (default) Netzer Cat No.: CB 00014 Cable: 30 AWG twisted pair (3): 2 (30 AWG 25/44 tinned copper, Insulation: PFE Ø 0.15 to Ø 0.6 ± 0.05 OD) Temperature rating: -60 to +150 Deg C Braided shield: Thinned copper braided 95% min. coverage Jacket: 0.44 silicon rubber (NFA 11-A1) Ø3.45 ±0.2 OD Extended Accuracy Outer Diameter DATA SHEET Cable Information Braided shield Jacket 0.44 mm 30 AWG single insulated wire Related Documents VLP-60 User Manual: Mechanical,...
Open the catalog to page 3
Precision Position Sensors ABSOLUTE POSITION ROTARY ELECTRIC ENCODER™ HARSH ENVIRONMENT VLP-60 icore DATA SHEET SECTION B-B Unless Otherwise Specified
Open the catalog to page 4All Netzer Precision Position Sensors catalogs and technical brochures
Archived catalogs
VLP-1004 Pages
- Angular encoder
- Absolute rotary encoder
- Hollow-shaft rotary encoder
- Industrial rotary encoder
- Magnetic rotary encoder
- IP65 rotary encoder
- Compact rotary encoder
- Aluminum rotary encoder
- Stainless steel rotary encoder
- Single-turn rotary encoder
- Ultra-rugged rotary encoder
- SSI angular encoder
- Digital rotary encoder
- High-resolution rotary encoder
- High-accuracy rotary encoder
- Miniature rotary encoder
- Non-contact rotary encoder
- Motor rotary encoder
- Standard rotary encoder
- Harsh environment rotary encoder