DS-70
5Pages

Catalog excerpts

Precision Position Sensors ABSOLUTE POSITION ROTARY ELECTRIC ENCODER™ HARSH ENVIRONMENT The DS-70 is a member of the DS series of Electric Encoders™, based on Netzer Precision proprietary technology. The Electric Encoder™ offers many advantages - some unparalleled • Low profile (10 mm) • Hollow, floating shaft. • No bearings or other contacting elements • High resolution and precision • High tolerance to temperature extremes, shock, moisture, EMI, RFI and Magnetic fields • Very low weight • Holistic signal generation • Analog or Digital interfaces

Open the catalog to page 1

Precision Position Sensors ABSOLUTE POSITION ROTARY ELECTRIC ENCODER™ HARSH ENVIRONMENT DATA SHEET Digital SSi Interface Synchronous Serial Interface (SSI) is a point to point serial interface standard between a master (e.g. controller) and a slave (e.g. sensor) for digital data transmission.

Open the catalog to page 2

ABSOLUTE POSITION ROTARY ELECTRIC ENCODER HARSH ENVIRONMENT Outer Diameter DATA SHEET Cable Information Extended Accuracy Netzer Cat No.: CB 00014 Cable: 30 AWG twisted pair (3): 2 (30 AWG 25/44 tinned copper, Insulation: PFE Ø 0.15 to Ø 0.6 ± 0.05 OD) Temperature rating: -60 to +150 Deg C Braided shield: Thinned copper braided 95% min. coverage Jacket: 0.44 silicon rubber (NFA 11-A1) Ø3.45 ±0.2 OD Gray / Blue Green / Yellow Resolution Code 30 AWG single insulated wire Braided shield 0 250mm Flying leads (default) * SSi only BIT (Build In Test): optional [] Related documents DS-70 User...

Open the catalog to page 3

ABSOLUTE POSITION ROTARY ELECTRIC ENCODER HARSH ENVIRONMENT DATA SHEET Unless Otherwise Specified DS-70-V02 Linear tolerances

Open the catalog to page 4

Netzer Precision Position Sensors ABSOLUTE POSITION ROTARY ELECTRIC ENCODER™ HARSH ENVIRONMENT Shaft - End installation (step) WARNING Do not use Loctite or other glues containing Cyanoacrylate. We recommend to use 3M glue - Scotch-Weld™ Epoxy Adhesive EC-2216 B/A. 3 threads M2 \F 5mm every 120° A_ Notes: 1. For any incompatibility with the model or missing dimension, please refer to Netzer for clarification. 2. All installation dimensions and tolerances are according to DS-70 ICD drawing. 3. All dimensions marked with * are critical for encoder installation. Critical dimensions marked with ‘

Open the catalog to page 5