*mydirectindustry

DS-58

Product catalog summary

Overview: The DS-58 is a rotary electric encoder designed for harsh environments, part of the Netzer Precision Position Sensor product line. It features a low profile, hollow floating shaft, and no contact elements, ensuring high precision and reliability.

Mechanical Specifications: The encoder allows for mounting eccentricity and axial tolerance of ±0.1 mm, with a rotor inertia of 684 gr·mm² and a total weight of 30 grams. It is constructed from Ultem™ polymer and TRVX-50 materials.

Electrical Specifications: Operates at a supply voltage of 5V ± 5% with a current consumption of 90 mA. It uses a shielded cable for interconnection.

Environmental Specifications: The encoder is designed to withstand temperatures from -40°C to +85°C in operation and -50°C to +100°C in storage. It has a relative humidity tolerance of 98% non-condensing, shock endurance of 100 g for 11 ms, and vibration endurance of 20 g from 10 to 2000 Hz. It is rated IP 40 for protection.

Performance: The encoder offers an angular resolution of 18-20 bits, with a maximum static error of ±0.010° and extended accuracy static error of ±0.008°. It supports a maximum operational speed of 4,000 rpm and has an unlimited single-turn measurement range.

Interface and Communication: The encoder uses a BiSS-C or SSi interface for digital data transmission, with a clock frequency range of 0.1 to 5.0 MHz. It supports a position update rate of 35 kHz, optionally up to 375 kHz.

Installation and Accessories: The encoder comes with optional accessories such as a demonstration kit and various installation kits. It is recommended to use 3M Scotch-Weld™ Epoxy Adhesive EC-2216 B/A for installation, avoiding cyanoacrylate-based glues.

Additional Information: The encoder includes advanced calibration and monitoring options through the Electric Encoder Explorer software, facilitating mechanical mounting and signal monitoring.

Catalog excerpts

Precision Position Sensors ABSOLUTE POSITION ROTARY ELECTRIC ENCODER™ HARSH ENVIRONMENT DS-58 icore DATA SHEET The DS-58 is a member of the DS series of Electric Encoders™ a product line based on Netzer Precision Position Sensor proprietary technology. EE products are characterized by features that enable unparalleled performance: featuresLow profile (10 mm) • Hollow, floating shaft • No bearings or other contact elements • High resolution and unparalleled precision • High tolerance to temperature extremes, shock, EMI, RFI and magnetic fields • Very low weight • Holistic signal generation • Digital interfaces for absolute position

Open the catalog to page 1

Precision Position Sensors ABSOLUTE POSITION ROTARY ELECTRIC ENCODER™ HARSH ENVIRONMENT DATA SHEET Digital SSi Interface Synchronous Serial Interface (SSi) is a point to point serial interface standard between a master (e.g. controller) and a slave (e.g. sensor) for digital data transmission.

Open the catalog to page 2

ABSOLUTE POSITION ROTARY ELECTRIC ENCODER HARSH ENVIRONMENT Outer Diameter DATA SHEET Cable Information Extended Accuracy Netzer Cat No.: CB 00014 Cable: 30 AWG twisted pair (3): 2 (30 AWG 25/44 tinned copper, Insulation: PFE Ø 0.15 to Ø 0.6 ± 0.05 OD) Temperature rating: -60 to +150 Deg C Braided shield: Thinned copper braided 95% min. coverage Jacket: 0.44 silicon rubber (NFA 11-A1) Ø3.45 ±0.2 OD 2 750mm Flying leads 3 1000mm Flying leads Green / Yellow Resolution Code Gray / Blue 0 250mm Flying leads (default) Braided shield 30 AWG single insulated wire BIT (Build In Test): optional [] B Related...

Open the catalog to page 3

Netzer Precision Position Sensors ABSOLUTE POSITION ROTARY ELECTRIC ENCODER1" HARSH ENVIRONMENT DATA SHEET Unless Otherwise Specified

Open the catalog to page 4

Netzer Precision Position Sensors ABSOLUTE POSITION ROTARY ELECTRIC ENCODER™ HARSH ENVIRONMENT DATA SHEET Shaft - End installation (step) +0.05 055 0 3 THREADS M2 DEEP5mm _ EQ.SP 0.1 B 3 THREADS M2 DEEP 5mm min EQ.SP Critical dimensions marked with Unless Otherwise Specified Do not use Loctite or other glues containing Cyanoacrylate. We recommend to use 3M glue - Scotch-Weld™ Epoxy Adhesive EC-2216 B/A.

Open the catalog to page 5

Netzer Precision Position Sensors ABSOLUTE POSITION ROTARY ELECTRIC ENCODER™ HARSH ENVIRONMENT DATA SHEET Unless Otherwise Specified

Open the catalog to page 6

Netzer Precision Position Sensors ABSOLUTE POSITION ROTARY ELECTRIC ENCODER™ HARSH ENVIRONMENT DS-58 icore DATA SHEET Shaft - MID installation (step) +0.05 055 0 Critical dimensions marked with Unless Otherwise Specified Do not use Loctite or other glues containing Cyanoacrylate. We recommend to use 3M glue - Scotch-Weld™ Epoxy Adhesive EC-2216 B/A.

Open the catalog to page 7

All Netzer Precision Position Sensors catalogs and technical brochures

Archived catalogs

VLP-100
4 Pages

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list