Precision Position Sensors ABSOLUTE POSITION ROTARY ELECTRIC ENCODER1" HARSH ENVIRONMENT DS-40 icore DATA SHEET The DS-40 is a member of the DS series of Electric Encoders™ a product line based on Netzer Precision Position Sensor proprietary technology. EE products are characterized by features that enable unparalleled performance: • Low profile (10 mm) • Hollow, floating shaft • No bearings or other contact elements • High resolution and unparalleled precision • High tolerance to temperature extremes, shock, EMI, RFI and magnetic fields • Very low weight • Holistic signal generation • Digital interfaces for absolute position The Electric Encoder™ is unique in being holistic, i.e., its output reading is the averaged outcome of the whole area of the rotor, This feature makes the Electric Encoder™ forgiving to mounting tolerances, mechanical wander etc. The absence of components such as ball bearings, flexible couplers, glass disc, light sources and detectors, along with very low power consumption makes the Electric Encoder™ virtually failure free. The internally shielded, DC operated Electric Encoder™ includes an electric field generator, a field receiver, a sinusoidal shaped dielectric rotor, and processing electronics. The output of Electric Encoder™ is a digital serial with absolute position single turn. The combination of precision, low profile, low weight and high reliability have made Netzer Precision encoders particularly suitable to a wide variety of industrial automation applications.

Precision Position Sensors ABSOLUTE POSITION ROTARY ELECTRIC ENCODER1" HARSH ENVIRONMENT DATA SHEET Digital SSi Interface Synchronous Serial Interface (SSI) is a point to point serial interface standard between a master (e.g. controller) and a slave (e.g. sensor) for digital data transmission. SSi / BiSS output signal parameters Output code Digital BiSS-C Interface BiSS - C Interface is unidirectional serial synchronous protocol for digital data transmission where the Encoder acts as “slave” transmits data according to “Master” clock. The BiSS protocol is designed in B mode and C mode (continuous...

Precision Position Sensors ABSOLUTE POSITION ROTARY ELECTRIC ENCODER1" HARSH ENVIRONMENT DATA SHEET Ordering Code Cable Information Netzer Cat No.: CB 00014 Cable: 30 AWG twisted pair (3): 2 (30 AWG 25/44 tinned copper, Insulation: PFE 0 0.15 to 0 0.6 ± 0.05 OD) Temperature rating: -60 to +150 Deg C Braided shield: Thinned copper braided 95% min. coverage Jacket: 0.44 silicon rubber (NFA 11-A1) 03.45 ±0.2 OD 30 AWG twisted pairs (3) Braided shield Jacket 0.44mm 0 3.45 ±0.2 mm 30 AWG single insulated wire Related documents DS-40 User Manual: Mechanical , Electrical and calibration setup. Optional...

Netzer ✓ Precision Position Sensors AB50LUTE POSITION ROTARY ELECTRIC ENCODER™ HARSH ENVIRONMENT WARNING Do not use Loctite or other glues containing Cyanoacrylate. We recommend to use 3M glue - Scotch-Weld™ Epoxy Adhesive EC-2216 B/A.