Absolute Position Rotary Electric Encoder - VLP-60 Data Sheet
1 / 4Pages

ABSOLUTE POSITION ROTARY ELECTRIC ENCODER HARSH ENVIRONMENT The VLP-60 is a member of the VLP series of Electric Encoders™ a product line based on Netzer Precision Position Sensor proprietary technology. EE products are characterized by features that enable unparalleled performance: The holistic structure of the Electric Encoder™ makes it unique: Its output reading is the averaged outcome of the entire area of the rotor. This feature allows the EE a tolerant mechanical mounting and to deliver outstanding precision. Due to the absence of components such as ball bearings, flexible couplers, glass discs, light sources and detectors along with very low power consumption enables the EE to deliver virtually failure-free performance in nearly all types of conditions. • Hollow shaft (Stator / Rotor) • No bearings or other contact elements • High resolution and unparalleled precision • High tolerance to temperature extremes, shock, moisture, EMI, RFI and magnetic fields DATA SHEET Calibration / Compensation Offsets Automatic / Manual Signals level Automatic / Manual Signals integrity Error / Warning report Error / Warning report Zero position The internally shielded, DC operated EE includes an electric field generator, a field receiver, sinusoidal-shaped dielectric rotor, and processing electronics. The EE output is a digital serial synchronous with absolute position single turn. • Very low weight • Holistic signal generation • Digital interfaces for absolute position This combination of high precision, low profile and, low weight has made Netzer precision encoders highly reliable and particularly well suited to a wide variety of industrial automation applications. Angular resolution Maximum tested static error Extended accuracy static error Supply voltage Maximum operational speed Current consumption Measurement range Single turn, unlimited Rotation direction Adjustable CW/CCW* * Default same direction from bottom side of the encoder Environmental Mechanical Operating temperature Allowable axial mounting tolerance ±0.1 mm Storage temperature Rotor inertia Relative humidity Total weight Shock endurance Outer Ø /Inner Ø/ Height Vibration endurance Material (stator, rotor) Nominal air gap (stator, rotor) Allowable mounting eccentr

ABSOLUTE POSITION ROTARY ELECTRIC ENCODER HARSH ENVIRONMENT SSi / BiSS output signal parameters Serial output Clock frequency Position update rate SSi / BiSS interface wires color code 1 Encoder Data Blue Green BiSS – C Interface is unidirectional serial synchronous protocol for digital data transmission where the Encoder acts as “slave” transmits data according to “Master” clock. The BiSS protocol is designed in B mode and C mode (continuous mode). The BiSS-C interface as the SSi is based on RS-422 standards. Power supply Master Clock Encoder Data Ack Start Total number of data bits Clock...

ABSOLUTE POSITION ROTARY ELECTRIC ENCODER HARSH ENVIRONMENT Ordering Code Green / Yellow Gray / Blue Resolution Code 0 250mm Flying leads (default) Netzer Cat No.: CB 00014 Cable: 30 AWG twisted pair (3): 2 (30 AWG 25/44 tinned copper, Insulation: PFE Ø 0.15 to Ø 0.6 ± 0.05 OD) Temperature rating: -60 to +150 Deg C Braided shield: Thinned copper braided 95% min. coverage Jacket: 0.44 silicon rubber (NFA 11-A1) Ø3.45 ±0.2 OD Extended Accuracy Outer Diameter DATA SHEET Cable Information Braided shield Jacket 0.44 mm 30 AWG single insulated wire Related Documents VLP-60 User Manual:...

ABSOLUTE POSITION ROTARY ELECTRIC ENCODER HARSH ENVIRONMENT DATA SHEET Unless Otherwise Specified Surface finish: N6