ABSOLUTE POSITION ROTARY ELECTRIC ENCODER HARSH ENVIRONMENT The DS-58 is a member of the DS series of Electric Encoders™ a product line based on Netzer Precision Position Sensor proprietary technology. EE products are characterized by features that enable unparalleled performance: DATA SHEET The holistic structure of the Electric Encoder™ makes it unique: Its output reading is the averaged outcome of the entire area of the rotor. This feature allows the EE a tolerant mechanical mounting and to deliver outstanding precision. Due to the absence of components such as ball bearings, flexible couplers, glass discs, light sources and detectors along with very low power consumption enables the EE to deliver virtually failure-free performance in nearly all types of conditions. • Hollow, floating shaft • No bearings or other contact elements • High resolution and unparalleled precision • High tolerance to temperature extremes, shock, EMI, RFI and magnetic fields The internally shielded, DC - operated EE includes an electric field generator, a field receiver, sinusoidal-shaped dielectric rotor, and processing electronics. The EE output is a digital serial synchronous with absolute position single turn. • Very low weight • Holistic signal generation • Digital interfaces for absolute position This combination of high precision, low profile and, low weight has made Netzer Precision encoders highly reliable and particularly well suited to a wide variety of industrial automation and harsh environment applications. Angular resolution Maximum tested static error Supply voltage Extended accuracy static error Current consumption Maximum operational speed Shielded cable Measurement range Single turn, unlimited Rotation direction Adjustable CW/CCW * Default same direction from bottom side of the encoder Operating temperature Storage temperature Relative humidity Allowable axial mounting tolerance ±0.1 mm Shock endurance Rotor inertia Vibration endurance Total weight Outer Ø /Inner Ø/ Height Material (stator, rotor) Allowable mounting eccentr

ABSOLUTE POSITION ROTARY ELECTRIC ENCODER HARSH ENVIRONMENT Digital SSi Interface Synchronous Serial Interface (SSi) is a point to point serial interface standard between a master (e.g. controller) and a slave (e.g. sensor) for digital data transmission. SSi / BiSS output signal parameters Serial output Clock frequency Position update rate Power supply Master Clock Encoder Data BiSS – C Interface is unidirectional serial synchronous protocol for digital data transmission where the Encoder acts as “slave” transmits data according to “Master” clock. The BiSS protocol is designed in B mode and C...

ABSOLUTE POSITION ROTARY ELECTRIC ENCODER HARSH ENVIRONMENT Outer Diameter DATA SHEET Cable Information Extended Accuracy Netzer Cat No.: CB 00014 Cable: 30 AWG twisted pair (3): 2 (30 AWG 25/44 tinned copper, Insulation: PFE Ø 0.15 to Ø 0.6 ± 0.05 OD) Temperature rating: -60 to +150 Deg C Braided shield: Thinned copper braided 95% min. coverage Jacket: 0.44 silicon rubber (NFA 11-A1) Ø3.45 ±0.2 OD 2 750mm Flying leads 3 1000mm Flying leads Green / Yellow Resolution Code Gray / Blue 0 250mm Flying leads (default) Braided shield 30 AWG single insulated wire BIT (Build In Test): optional [] B Related...

ABSOLUTE POSITION ROTARY ELECTRIC ENCODER HARSH ENVIRONMENT DATA SHEET SECTION A-A Unless Otherwise Specified DS-58-V02

ABSOLUTE POSITION ROTARY ELECTRIC ENCODER HARSH ENVIRONMENT DATA SHEET Shaft - End installation (step) Shaft end Shaft end spring MA-DS58-004 Optional installation Screw DIN 912 kit M2x4 Critical dimensions marked with “*” Unless Otherwise Specified DS-58-V02 Do not use Loctite or other glues containing Cyanoacrylate. We recommend to use 3M glue - Scotch-Weld™ Epoxy Adhesive EC-2216 B/A. www.netzerprecision

ABSOLUTE POSITION ROTARY ELECTRIC ENCODER HARSH ENVIRONMENT DATA SHEET Unless Otherwise Specified DS-58-V02

ABSOLUTE POSITION ROTARY ELECTRIC ENCODER HARSH ENVIRONMENT DATA SHEET Shaft - MID installation (step) Shaft end MA-DS58-002 Optional installation kit Critical dimensions marked with “*” Unless Otherwise Specified DS-58-V02 Do not use Loctite or other glues containing Cyanoacrylate. We recommend to use 3M glue - Scotch-Weld™ Epoxy Adhesive EC-2216 B/A.