Absolute Position Rotary Electric Encoder - DL-25 Data Sheet
4Pages

Absolute Position Rotary Electric EncoderTM The DL-25 is a member of the DL series of Electric Encoders™, based on Netzer precision proprietary technology. The Electric Encoder™ offers many advantages - some unparalleled • High resolution and precision • High tolerance to temperature extremes shock, moisture, EMI, RFI and Magnetic fields. • Holistic signal generation HARSH ENVIRONMENT DATA SHEET The Electric Encoder™ is unique in being holistic, i.e., its output reading is the averaged outcome of the whole area of the rotor, This feature makes the Electric Encoder™ forgiving to mounting tolerances, mechanical wander etc. The absence of components such as flexible couplers, glass disc, light sources and detectors, along with very low power consumption makes the Electric Encoder™ virtually failure free. The internally shielded, DC operated Electric Encoder™ includes an electric field generator, a field receiver, a sinusoidal shaped dielectric rotor, and processing electronics. General Angular resolution Maximum tested static error Extended accuracy static error Maximum operational speed Single turn absolute position Rotation direction* Adjustable CW/CCW The output signals of Electric Encoder™ are analog Sine / Cosine representing the rotation angle. The digital outputs are obtained by further processing - which may be either internal or external to the encoder. The combination of precision, low profile, low weight and high reliability have made Netzer Precision encoders particularly suitable to a wide variety of critical applications including, but not limited to medical equipment and aerospace. Starting torque Shaft radial force (max) Cable length Total weight Supply voltage Current consumption * Default same direction from bottom side of the encoder 30 gr (with standard 250 mm cable) Outer diameter / Profile / Shaft 25 / 24.3 / 4 mm Material (case, shaft) Operating temperature range Storage temperature Shock endurance Vibration endurance

Absolute Position Rotary Electric EncoderTM HARSH ENVIRONMENT SSi / BiSS Output signal parameters DATA SHEET Digital BiSS-C Interface Output code Serial output Synchronous Serial Interface (SSI) is a point to point serial interface standard between a master (e.g. controller) and a slave (e.g. sensor) for digital data transmission. Clock frequency Position update rate (Max) BiSS – C Interface is unidirectional serial synchronous protocol for digital data transmission where the Encoder acts as “slave” transmits data according to “Master” clock. The BiSS protocol is designed in B mode and C...

Absolute Position Rotary Electric EncoderTM HARSH ENVIRONMENT Outer Diameter 0 250mm Flying leads (default) Netzer Cat No.: CB-00014 Provider: Ray-Q USA . wire CAT No: RQ213210 Cable: 30 AWG twisted pair (3) :2 (30 AWG 25/44 finned copper, 0.15 PFE to Ø 0.6 ± 0.05 OD). Temperature rating: -60 to +150 Deg C. Braided shield: Thinned copper braided 95 % min. coverage. Jacket: 0.45 silicon rubber jacket Ø3.45 ±0.2 OD 1 500mm Flying leads 2 750mm Flying leads Red / Black Gray / Blue Green / Yellow 30 AWG twisted pairs (3) 30 AWG single insulated wire Braided shield BIT (Build In Test): optional...

Absolute Position Rotary Electric EncoderTM HARSH ENVIRONMENT DATA SHEET Three M2 screws, every 120° Three clamps MA-00007 with M2 screws, every 120° Unless Otherwise Specified