- Catalogs
- Netter Vibration
- Series NTK
Series NTK
Series NTK
- Nominal frequency ranges from 51 min-1 to 10,000 min-1.
- Centrifugal force ranges from 1 N to 10,000 N.
- Frequency and amplitude can be adjusted separately.
- Available in stainless steel and aluminum versions.
- The vibrators operate using a freely oscillating, self-reversing piston.
- They start and stop instantly in any installed position.
- Noise levels are below 80 dB(A).
- Frequency is adjustable via air supply regulation, and amplitude is adjustable by throttling exhaust air.
- Drive medium: Compressed air or nitrogen, preferably with oil mist.
- Operating pressure: 2 bar to 6 bar.
- Ambient temperature: Varies by model, with some models operating up to 120°C.
- Additional weights can be used to adjust the working moment and amplitude.
- Bellows are available for protection against dirt and dust.
- Lubrication-free operation is possible for aluminum housing models.
Catalog excerpts
Netter Pneumatic Linear Vibrators Series NTK • Linear vibration • Nominal frequency from 519 min-1 to 3.800 min-1 • Centrifugal force from 14 N to 4.748 N • Variable additional weights • Frequency and amplitude are separately adjustable • Stainless steel version available • Ex II 2 GD 85°C (T6) available (ATEX) Serving industry with vibration
Open the catalog to page 1
The table shows the most frequent ratings of piston vibrators series NTK. □ "Piston" means, that the piston vibrates, the housing is bolted to the mass to be operated. 2 The additional weights SM increase the mass of the piston and in consequence the amplitude. 3 "Housing" in the table means that the vibrator is fixed to the piston and allows additional com- binations. 4 Some vibrators may be fitted additional weights SM at the housing. Methods of attachment *ln case of horizontal mounting with weights, please pay particular attention to the operating manual! Type Oscillating part Working moment...
Open the catalog to page 2
* For lubrication free operation contact our application technicians. Subject to technical modifications. ** All weights inclusive fixing bolt. *** Normal litre = uncompressed air, NTK 16, 25, 40, 55, 85 and 110 operation is possible up to 16 bar. Technical data may vary depending on application. Please request comparative values. NTK weights Additional weightsPiston, housing, total weight Series SM Vibrator Netter Bellows Series NFB Applications Additional weights SM are used to increase the working moment. While fixing additional weights on the moving part of the vibrator, the working moment...
Open the catalog to page 3
NetterVibration Netter Pneumatic Linear Vibrators Series NTK Type 1 NTK 40 HF: 22 mm * centre of vibration '* additional form of attachment from NTK 55 upwards ** optional M, or M2 Applications The pneumatic linear vibrators series NTK are especially suitable for conveying, compacting and loosening bulk material, due to the completely linear vibration. They may also serve to stimulate and influence production processes. A special feature of the NTK vibrators is the variety of mounting options. It is possible to attach the housing or the piston to a vibrating mass. Additional weights SM allow...
Open the catalog to page 4All Netter Vibration catalogs and technical brochures
NCT series2 Pages
NVV series2 Pages
Series NTP2 Pages
Series NTS4 Pages
Series NHK2 Pages
series PKL4 Pages