ProSafe® 16-AP Wireless Management System Central Configuration for up to 16 Wireless Access Points NETGEAR® ProSAFE® Wireless Management Solutions solve the quandary of individually configuring, deploying, and managing multiple standalone wireless access points. With support of up to 150 APs, the Wireless Controller provides a central point to configure and manage your wireless network. Firmware updates and configuration changes can be pushed across multiple APs simultaneously – at the push of a button. Simplify the wireless management and improve user experience with the following key functions: • nable wireless users to seamlessly roam while continuously connected to the E network • ptimize network with automatic RF channel settings and adjustments of AP O output power setting • Centrally monitor and manage AP’s for a single or multiple remote sites • rotect against intruders via advanced wireless rogue AP detection P algorithms • egment guest and corporate access with multiple SSIDs, Guest Captive S Portal, and standard based VLAN configurations Differences Between WMS5316 and a Full Service Wireless Controller WC7520 WMS5316 Main functionality Wireless Management Wireless Controller Central configuration Multiple SSIDs, VLANs Number of access points Automatic RF management Limitation of number of clients per AP RF Planning before deployment Yes - Based on Floor plans and computed coverage Dynamic RF with heat map after deployment Yes - Real time view of wireless connectivity Self Healing Wireless network Yes - Automatic WLAN healing after loss of AP or due to RF interferences Dynamic Load Balancing Yes - Based on number of clients per AP or client Signal strength/Data rate threshold L2 and L3 Fast Roaming support Built-in AAA server, LDAP support Captive portal with Guest management Summary Access Points configuration

ProSafe® 16-AP Wireless Management System Features and Benefits Supported Access Point Models Minimum Firmware Version Requires Up to 16 mixed access points are simultaneously supported by the Wireless Management System (WMS5316) WNDAP360 ProSAFE Dual Band 802.11n Wireless Bccess Point WNDAP350 ProSAFE Dual Band 802.11n Wireless Access Point WNAP320 ProSAFE 802.11n Wireless Access Point WNAP210v1 ProSAFE 802.11n Wireless Access Point WG103 ProSAFE 802.11g Wireless Access Point Access Point Discovery Discovers NETGEAR Wireless Access Points everywhere on the LAN Wireless Performance Optimization...

ProSafe® 16-AP Wireless Management System Technical Specifications Wireless Configuration - RF Centralized Automatic RF Management Automatically allocates access points channel and RF power based on each access point performance in the local environment. For example, if an access point experiences interference on a channel, the Wireless Management System allocates a different channel to that access point. Selectable Corporate Channel List for Auto Channel Selection For channel list, the administrator will be able to select what are the allowed corporate channels for 2.4GH and 5GHz band. The Channel...

ProSafe® 16-AP Wireless Management System Technical Specifications Wireless Network Monitoring Wireless Client Status The client status list specifies detailed information about each client node currently associated with managed access points Wireless Network Usage Network usage statistics display plots of average received/transmitted network traffic per managed access point. Three different plots show Ethernet, Wireless 802.11 b/bg/ng and 802.11 a/na mode traffic separately. Wireless Network Topology • isplay topology graph of the managed access points (connectivity graph). The managed access...