Catalogs >
NETGEAR >
ANT2409 ProSAFE® 9 DBI Antenna

ANT2409 ProSAFE® 9 DBI Antenna
5Pages

Catalog excerpts

NETGEAR ProSafe® Wireless LAN Antennas and Cables ProSafe 14 dBi Patch Panel Directional Antenna - ANT24D18 ProSafe 10 dBi 2x2 Indoor/Outdoor Directional Antenna - ANT224D10 ProSafe 9 dBi Omni-directional Antenna - ANT2409 ProSafe 7 dBi Omni-directional Antenna - ANT2407 ProSafe 5 dBi 3x3 Omni-directional Antenna - ANT32405 ProSafe 5 dBi Omni-directional Antenna - ANT2405 ProSafe Low-Loss Antenna Cables Data Sheet Optimize WLAN Range and Power NETGEAR’s ProSafe line of antennas and accessories for 802.11b, 802.11g and 802.11n devices give you multiple options for maximizing the reach and performance of your wireless infrastructure devices. Every WLAN deployment is unique. When planning a network that incorporates wireless, varying facility sizes, construction materials, distance between transmission points and physical obstructions must be accounted for. With both directional and omni-directional antennas, indoor and outdoor options, low-loss cables, mounting hardware, and other accessories, installers can customize a wireless solution that meets the requirements of even the most challenging applications. ProSafe 14 dBi Patch Panel Directional Antenna The ANT24D18 indoor/outdoor directional* 2.4 GHz antenna provides a 3-in-1 solution for mixed applications in combination with an 802.11b or 802.11g access point or wireless router. One, it delivers extended access point range in a single floor environment ideally positioned in the corner of a building. Two, it functions point-to-point so that you can wirelessly connect LANs between buildings in a campus-type environment. Three, it provides multifloor transmission when placed on a ceiling, as the higher power output extends the range through typical flooring materials. Includes several mounting options (fixed wall, wall adjustable, and pole), cable sold separately. *Directional: Concentrates transmit and receive radio-frequency energy into a cone, or beam, for higher signal strength and reception in a single direction. ProSafe 10 dBi 2x2 Indoor/Outdoor Directional Antenna The ANT224D10 2.4 GHz antenna provides extended range connectivity for point-topoint wireless bridges at wireless 802.11n speeds. With a maximum range of 8.5 KM, the ANT224D10 enables high speed connections for building-to-building deployments. Additionally, this antenna can be used indoors for floor-to-floor connectivity or to provide a narrow beam of coverage. Due to the multiple streams of traffic in the 802.11n specification, this antenna requires two antenna cables, which are available in a variety of lengths. It includes several mounting options and comes with wall/pole mounting hardware. Cables are sold separately.

Open the catalog to page 1

NETGEAR ProSafe Wireless LAN Antennas and Accessories ProSafe 9 dBi Indoor/Outdoor Omni-directional Antenna The ANT2409 indoor/outdoor 2.4 GHz antenna provides extended point-to-multi-point coverage for wireless 802.11g devices. Optimal for medium range indoor or outdoor pointto-multi-point applications. Included lightning arrestor (a $90 value) helps prevent damage due to lightning-induced surges or static electricity in outdoor applications. Typically hung from crossbars of drop ceilings or on a rooftop, the waterproof and UV resistant ANT2409 includes wall and pole mounting materials for...

Open the catalog to page 2

NETGEAR ProSafe Wireless LAN Antennas and Accessories ProSafe Wireless LAN Indoor/Outdoor Antennas Product ProSafe 14 dBi Patch Panel Directional Antenna - ANT24D18 ProSafe 10 dBi 2x2 indoor/ outdoor directional antenna ANT224D10 ProSafe 9 dBi Omni-directional Antenna - ANT2409 Wireless Signal Typical Application Maximum Outdoor Range Frequency Range Beam Width Linear; Vertical Linear; Vertical Operational Temperature • Antenna - Reverse N female • Lightening arrestor Reverse N female • Adapter - Reverse SMA • Antenna - N Jack Male • Lightening arrestor - N Jack Male to N Jack Male •...

Open the catalog to page 3

NETGEAR ProSafe Wireless LAN Antennas and Accessories ProSafe Wireless LAN Indo or/Outdoor Antennas Continued Product ProSafe 7 dBi Omni-directional Antenna - ANT2407 ProSafe 5 dBi 3x3 Omnidirectional Antenna - ANT32405 ProSafe 5 dBi Omni-directional Antenna - ANT2405 Wireless Signal Typical Application Frequency Range Beam Width Linear Vertical Operational Temperature 110 x 65 x 300 mm (4.33 x 2.56 x 11.81 in) Integrated cable length: 1.5 m 280 x 98 x 28 mm (11 x 3.86 x 1.1 in) Integrated cable length: 1.0 m Package Contents • Indoor 7 dBi Omni-directional Antenna with integrated cable...

Open the catalog to page 4

NETGEAR ProSafe Wireless LAN Antennas and Accessories Low-loss Antenna Cables These 1.5 m, 5 m, and 10 m antenna cables offer low loss at 2.4 GHz and added flexibility for setting up access points at a greater distance from a power source. They come with reverse SMA connectors and provide a standard connection optimized for use with NETGEAR‘s line of WLAN antennas (range can be drastically reduced if longer or higher loss cables than these are used). NETGEAR low-loss cables with 2 Reverse SMA Connectors extend the length between NETGEAR wireless access points or routers and the external...

Open the catalog to page 5