HDselect - multi-sensor HD camera
3Pages

HDselect compact remote HD camera | CCU with multi-sensor ability HDselect is offered with two different high-sensitive CMOS color image sensors standing for brillant image quality and allowing smallest camera designs: remote HD camera modules with a 1x1 mm Awaiba image sensor (44 fps, 250x250 pixels), 1) 1/3" image sensor and a 1/3" Sony image sensor (30 fps, 1280x1024 pixels). 2) 1x1 mm image sensor HDselect features remote distances from camera head to camera controller of up to 5 meters and enables data transfer in 1080p/60 video quality from camera controller to e.g. monitor or computer. Native image signals in excellent quality without inaccuracy due to interpolation are transmitted via HDMI or USB 3.0 interface for image processing, display or recording. The camera head electronics allow a separation from the camera controller because of Low Voltage Differential Signaling (LVDS) for image data transfer, which facilitates a miniature cable over remote distances to the camera controller at low noise levels. HDselect meets highest medical safety regulations as image date is transmitted safely over an electrically non-conducting boarder. The cost-effective FPGA performs hot plug recognition regarding different image sensors, real-time image pre-processing tasks, i.a. debayering, exposure control, shutter speed, and the embedding of the images at native frame rates/formats for USB 3.0 and HDMI. NET New Electronic Technology GmbH info@net-gmbh.com www.net-gmbh.com NET Italia S.r.l. info@net-italia.it www.net-italia.it NET France info@net-france-sas.fr www.net-france-sas.fr NET Japan Co., Ltd. info@net-japan.com www.net-japan.com Please note that all data and illustrations are not binding and are subject to error, change and omissions without notice. camera controller HDselect serves various applications simply by exchanging the compact HD camera modules without any setting effort. The compact HD camera layout suits minimal-invasive operations and delivers excellent image quality at 1080p/60. Thus only one versatile camera controller is necessary to reach the goal of different applications of a customer. This is achieved through electronics developed by NET, which enable hot plugging functionality between camera controller and camera HD module. It is perfectly suitable for applications in the medical and industrial field, for example endoscopy, intra-oral diagnosis, and robotics.

HDselect HDselect Technical Data Image Sensors Sony IMX035 resolution [pixel] color depth board size (length x width) operating temperature Cable to HD Camera Module length 1 twisted pair screened (LVDS), 2 power cables, 2 control cables Camera Controller cable connector 6 pin (NET specific configuration: Power, GND, I2C, LVDS, program) sensor connnector flat ribbon cable, 10 pin power data power supply board size (length x width) Interfaces HDMI Software Direct Show Filter (Direct-X) For use camera in non NET specific software, e.g. VLC media player, amcap graphic card applicable for...

NET New Electronic Technology GmbH NET Italia S.r.l. info@net-gmbh.com info@net-italia.it www.net-gmbh.com www.net-italia.it camera head, options: -LVDS {image data) -configuration interface galvanic isolation (pre-processing + scaling for HDMI)