1. Catalogs
  2. NESTRO Lufttechnik GmbH
  3. Data Sheet Deduster NE J

Data Sheet Deduster NE J

Data Sheet Deduster NE J

Data Sheet Deduster NE J

Product catalog summary
Overview: The document is a technical data sheet for the NESTRO® NE series dedusters, designed for dust extraction in small to medium enterprises or as a supplement for larger systems. It highlights the product's high energy efficiency, compact design, and quiet operation.
Specifications:
  • High energy efficiency with IE5 reluctance motor and frequency converter.
  • Fire protection flap eliminates the need for powder or water extinguishing devices.
  • Indoor installation with a compact design.
  • Remaining dust content is less than 0.1 mg/m³.
  • Suitable for up to 8 processing machines, equipped with a touch panel.
  • Maximum noise level of 74 dB(A).
  • Made in Germany.
Technical Data:
  • Models: NE 160, NE J 200, NE J 250, NE J 300, NE J 350.
  • Certified according to BGHM, Germany.
  • Energy efficiency class: IE3 and IE5.
  • Power consumption ranges from 2.2 kW to 11.0 kW.
  • Operating air volume ranges from 2300 m³/h to 9500 m³/h.
  • Negative pressure at nominal air volume ranges from 2450 PA to 2700 PA.
  • Filter regeneration is pneumatic with compressed-air pulse (Jet).
  • Operation mode is permanent with three-phase current at 400 V, 50 Hz.
Accessories:
  • Briquetting press and rotary gate valve available for system integration.
  • Silencer reduces noise by approximately 10 dB(A).
  • Ultrasonic sensor for level control and set of PE bags available.
Additional Information: The dedusters are designed to operate under ambient conditions of 5°C to 40°C, with measurements in accordance with DIN standard 8416. The document also provides contact information for NESTRO® Lufttechnik GmbH.
See more

Catalog excerpts

Data Sheet Deduster NE J-1

Data Sheet Fiche technique  Sehr hoher Wirkungsgrad, NE J mit IE5 Reluktanzmotor und mit Frequenzumrichter  Dank Brandschutzklappe keine Pulver- / Wasserlöschung nötig  In Innenräumen aufstellbar, geringer Platzbedarf  Reststaubgehalt <0,1 mg/m³  NE J für bis zu 8 Bearbeitungsmaschinen, mit Touchpanel  Flüsterleise, max. 74 dB(A)  MADE IN GERMANY  High Energy Efficiency, NE J feat. IE5 Reluctance Motor with Frequency Converter  Fire Protection Flap - no Powder or Water Extinguishing Device necessary  Indoor Installation possible, very Compact Design  Remaining Dust <0,1 mg/m³  NE J for up to 8 Processing Machines, with touch panel  Extremely Quiet, max. 74 dB(A)  MADE IN GERMANY  Rendement très élevé, NE J avec IE5 moteur à réluctance et avec variateur de fréquence  Clapet coupe-feu, un extincteur à poudre ou à eau devient superflu  Mise en place à l’intérieur, compact  Taux d’empoussièrement résiduel <0,1 mg/m³  NE J pour max. 8 machines à bois, avec écran tactile  Silencieux, 74 dB(A) max.  MADE IN GERMANY Die NESTRO® Entstauber wurden speziell für kleine und mittlere Betriebe mit einem Luftbedarf von 1.780 bis zu 8.000 m³/h oder für große Betriebe als Ergänzung einer vorhandenen zentralen Absauganlage entwickelt. Alle NESTRO® Entstauber sind Unterdruckfilter, bei denen der integrierte Ventilator dem Filter nachgeschaltet ist (das Ventilator-Laufrad wird nur mit Reingas beaufschlagt). These NESTRO® dust separators are developed especially for small and middle size enterprises with a total air requirement of 1,780 up to 8,000 m³/h or for bigger companies as a supplement of an existing central dust extraction system. All NESTRO® dedusters use negative pressure technology, i.e. the integrated ventilator is located behind the filter section (the impeller of the ventilator is loaded with clean gas only). Les dépoussiéreurs NESTRO® ont été spécialement conçus pour les petites et moyennes entreprises ayant des besoins en débit de 1 780 à 8 000 m3/h ou en complément d’aspiration pour de grandes entreprises. Tous les dépoussiéreurs NESTRO® travaillent en air propre et le ventilateur est situé après la surface

 Open the catalog to page 1
Data Sheet Deduster NE J-2

Technische Daten Technical Data Caractéristiques techniques Zertifiziert nach BGHM Certified according to BGHM, Germany Certifié conforme selon BGHM, Allemagne Energieeffizienzklasse Motor Energy Efficiency Class Motor Classe de rendement énergétique du moteur Leistungsaufnahme Power Consumption Puissance absorbée Stromaufnahme Current Consumption Courant absorbé Vorsicherung | FI-Schutzschalter Pre-fusing | EL CB Fusible en amont | DD Filterfläche Filter Area Surface filtrante Abmessung T x B x H Dimensions D x W x H Dimensions L x l x H Volumen Staubtonne (Holzstaub) Bin Volume (Wood Dust)...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.