video corpo

SUNSYSTEM 90m

SUNSYSTEM 90m

Product catalog summary
Standard Test Conditions (STC): The photovoltaic modules are tested under standard conditions of 1000 W/m2 irradiation, an ambient temperature of 25°C, and a spectral distribution of AM 1.5.
Physical Specifications: The modules have dimensions of 1200 x 550 x 35 mm and weigh 8.0 kg. They are made of monocrystalline cells measuring 125 x 125 mm, with an aluminum frame and TPT back closing. The front is closed with 3.2 mm tempered glass. Each module contains 36 cells arranged in a 4 x 9 configuration.
Performance and Warranty: The modules have a fully positive tolerance and a guaranteed yield for 25 years. Each module undergoes an individual flash test. The workmanship and materials are warranted for 10 years, with certification in accordance with IEC 61215:2005 and EN 61730:2007. The modules maintain 80% of the minimum peak power for 25 years.
Electrical Specifications: The maximum power (Pmax) is 90 Wp with a module efficiency of 13.9%. The voltage at maximum power (Vmp) is 19.2 V, and the current at maximum power (Imp) is 4.69 A. The open circuit voltage (Voc) is 23.4 V, and the short circuit current (Isc) is 5.16 A. The temperature coefficients are specified for various parameters, including Vmp, Pmax, Imp, Voc, and Isc.
Limitations: The maximum system voltage is 1000 V DC, and the maximum physical load is 2400 Pa. The operational temperature range is from -40°C to +85°C, with a nominal operating cell temperature (NOCT) of 48°C ± 2°C.
Additional Information: The modules are equipped with MC 4 connectors and are made in the EU. The I-V characteristic of the module shows temperature dependence, with performance data provided for various temperatures.
Contact Information: NES Ltd., 12 Madara Blvd, Shumen, Bulgaria, 9700. Phone: +359 54 874, Fax: +359 54 874 556, Email: [email protected], Website: www.sunsystem.bg.
Note: The information provided is subject to change without prior notice.
See more

Catalog excerpts

SUNSYSTEM 90m-1

SUNSYSTEM 90m Photovoltaic modules Made in EU Crystalline modules with fully positive tolerance. Yield guaranteed for 25 years. Individual flash test record for each module. Electrical specifications: Maximum power Pmax Open circuit voltage Voc Short circuit current Isc Cell efficiency Module efficiency Physical specifications: Back closing Front closing Connector type Temp. coeff. of Pmax I-V characteristic of module 7 temperature dependence 6 5 Overall dimensions * STC (Standard test conditions) : Irradiation 1000 W/m2, ambient temperature 25°C, Spectre AM 1.5 Temperature range 80% of the minimum peak power Certified in accordance with IEC 61215:2005 & EN 61730:2007 N ES Ltd . Bulgaria, 9700 Shumen 12 Madara Blvd tel: +359 54 874 558 e-mail: [email protected] www.sunsystem.bg The information provided herein is subject to change without prior notice.

 Open the catalog to page 1

All NES - New Energy Systems catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.