NEOTON MOTOR The CWFL08813-11030NW48-S000 is a p88 mm A-series frameless torque motor kit that pairs a slim 13 mm stator stack with a large 41 mm bore ID, allowing cables, coolant lines, or optical paths to pass cleanly through the joint centre. The 16-pole 3-phase PMSM delivers 1.10 N-m rated / 3.30 N-m peak torque at 3000 RPM on 48 VDC with ultra-smooth low-speed torque, making it well-suited for collaborative robot elbow and shoulder joints, hollow-shaft direct-drive rotary tables, and compact medical imaging gantries where both axial compactness and central routing are required. • ^88 mm stator OD, 13 mm slim stack (A-series) for axially constrained designs • 1.10 N-m rated / 3.30 N-m peak torque at 3000 RPM on 48 VDC • 16-pole 3-phase PMSM for ultra-smooth low-speed operation • Class F insulation (155 °C); optional Hall sensor + temperature sensor • Custom stator stack, bore ID, and winding — no MOQ | SPECIFICATIONS Rated Voltage Rated Current Peak Current (Instantaneous) Rated Output Power Rated Speed Rated Torque Peak Torque (Instantaneous) Back-EMF Constant (Ke) Torque Constant (Kt) Rotor Inertia Poles Insulation Class Weight Operating Environment Ls (Stator Stack Length)

Power Leads 3 wires (U/V/W), L = 200 mm, TEFLON insulation; U — Red, V — White, W — Black Hall Sensor (optional) 5 wires: Vcc, GND, HA (Green), HB (Blue), HC (White) — L = 200 mm, TEFLON Temperature Sensor (optional) 2 wires: + (Orange), − (Yellow) — L = 200 mm, TEFLON Not included — host structure provides bearing CWFL08813-11030NW24-S000: contact NEOTON for 24 V winding parameters CWFL08813-11030NW36-S000: contact NEOTON for 36 V winding parameters CWFL08813-11030NW48-S000: 10.3 A rated, 31.0 A peak, Ke = 7.4 Vrms/krpm, Kt = 0.1064 N·m/A Stack thickness, bore ID, winding, sensor type — contact...

TORQUE-SPEED CHARACTERISTICS Speed [rpm] NEOTON MOTOR | www.neotonmotor.com | [email protected] | Generated October 1, 2026