*mydirectindustry

Catalogs
NEOTON MOTOR
ACSDP200H_datasheet.pdf

ACSDP200H_datasheet.pdf

Product catalog summary

Overview: The ACSDP200H is a high-performance AC servo drive designed for industrial applications, supporting motors with power outputs ranging from 1kW to 3kW. It operates with single or three-phase AC220V input and is suitable for precise pulse-type servo control.

Key Highlights:

Output power range: 1kW – 3kW
Input: Single/Three-phase AC220V with a tolerance of -15% to +10%, 50/60Hz
Control Modes: Six modes including Position, Speed, Torque, and their combinations
Pulse Input Options: Pulse+Direction, CCW-CW, A/B Quadrature, Internal position
Communication: RS485 Modbus RTU
Dual Encoder Ports: CN2A for incremental and CN2B for absolute encoders
Display: 5-digit LED with a 4-button keypad

Specifications:

Protection Functions: Includes overspeed, overvoltage, undervoltage, overcurrent, overload, encoder fault, control power fault, and position error
Monitor Functions: Speed, current position, command pulse accumulation, position error, motor torque, motor current, and running status
Control Inputs: Servo enable, alarm clear, drive inhibit, deviation counter clear, command pulse inhibit, torque limits
Control Outputs: Servo ready, servo alarm, position complete, mechanical brake
Regenerative Braking: Supports internal and external resistors
Load Inertia: ≤ 3× motor inertia
Dimensions: 51 × 191.3 × 168.5 mm
Cooling: Forced air (fan)

Connections:

CN1: Command input/output signal connector
CN2A/B: Encoder signal connectors for incremental and absolute encoders
CN3/CN4: Communication connectors for RS485
Main Power Terminals: L1, L2, L3
Braking Resistor Terminals: P, D, C, N
Motor Output Terminals: U, V, W
Protective Earth Terminal: PE

Operation:

CHARGE LED: Indicates main circuit power status
Keypad: Includes Increase, Decrease, SET, and Exit keys for parameter adjustments

Catalog excerpts

The ACSDP200H is a pulse high-performance AC servo drive supporting 1kW-3kW motors with single/three-phase AC220V input. Designed for high-power industrial applications requiring robust and precise pulse-type servo control. • Output power range: 1kW - 3kW • High-performance pulse control for high-power applications • 6 control modes: Position, Speed, Torque, Position+Speed, Position+Torque, Speed+Torque mixed • Pulse input: Pulse+Direction / CCW-CW / A/B Quadrature / Internal position • Electronic gear ratio: Numerator 1-32767 / Denominator 1-32767 • Dual encoder ports: CN2A (incremental) + CN2B (absolute) • 5-digit LED display with 4-button keypad Model Drive Type Output Power Input Voltage Control Mode Position+Speed mixed 4: Position+Torque mixed 5: Speed+Torque mixed Protection Functions Monitor Functions Control Input Control Output Regenerative Braking Load Inertia Display / Operation Overspeed / Main power overvoltage / Undervoltage / Overcurrent / Overload / Encoder fault / Control power fault / Position error Speed / Current position / Command pulse accumulation / Position error / Motor torque / Motor current / Running status 1: Servo enable 2: Alarm clear 3: CCW drive inhibit 4: CW drive inhibit 5: Deviation counter clear 6: Command pulse inhibit 7: CCW torque limit 8: CW torque limit Servo ready / Servo alarm / Position complete / Mechanical brake Internal and external resistor support 5-digit LED, 4 buttons (4 Increment / ▼ Decrement / SET Confirm / •< Exit)

Open the catalog to page 1

Position Input Mode 0: Pulse+Direction 1: CCW/CW Pulse 2: A/B Quadrature 3: Internal position control Electronic Gear Numerator Electronic Gear Denominator Dimensions (W×H×D) Mounting Depth Command input/output signal connector Encoder signal connector — connected to incremental encoder or motor encoder Encoder signal connector — connected to absolute encoder of the motor Communication connectors (RJ45, for RS485 crystal head) Main power input terminals Braking resistor connection terminals Motor output terminals — connect to servo motor U, V, W phases Protective earth terminal — connect to power...

Open the catalog to page 2

WIRING DIAGRAM — POSITION CONTROL MODE Note: P200H supports three-phase 220VAC input Alarm Reset Digital Output Position Command Pulse (5V) Position Command Sign (SV) Chassis Ground 1. The input power suppfy voltage range is 20V-28V DCfand the maximum operating current is 100mA. If using an external 24V power supply, please connect the external power supply +24V to pin 16 (COM), and the external power supply 0V to pin 43 (EOV). 2. The DO output power supply must be provided by the user, with a voltage range of 5V~24V DC. The DO terminal maximum allowable voltage is DC30V, and the maximum allowable...

Open the catalog to page 4

Open the catalog to page 5

All NEOTON MOTOR catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

About DirectIndustry

DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.

Are you a buyer?

Find the right product
Request For Quotation (RFQ)
Our brands
FAQ
Contact Us
Newsletter subscription

Are you a supplier?

Exhibit with us
Our services
Manufacturer account
Distributor Account

About Us

VirtualExpo Group
Our Partners
Recruitment
Testimonials