*mydirectindustry

Catalogs
NEOTON MOTOR
57BH75PS12IC_datasheet.pdf

57BH75PS12IC_datasheet.pdf

Product catalog summary

Overview: The 57BH75PS12IC is a 57 mm integrated stepper servo motor designed for automation applications, offering a maximum output torque of 1.2 N·m. It features a compact design with integrated motor, drive, and encoder, facilitating clean installation.

Key Highlights:

Control: TTL pulse/direction control.
Input Voltage: 24–60 VDC.
Encoder Feedback: 4096-line/16,384-count.
Microstep Settings: 16 DIP-switch settings with software adjustment.
Speed Range: 0.01–3000 rpm.

Specifications:

Model Number: 57BH75PS12IC.
Frame Size: 57 mm (NEMA 23).
Body Length: 75 mm.
Shaft Diameter: 8 mm.
Current Setting: 0.2–3.2 A, software adjustable; factory-matched motor: 4.0 A.
Phase Resistance: 0.44 Ω ±20%.
Phase Inductance: 1.4 mH ±20%.
Rotor Inertia: Approx. 280 g·cm².
Weight: Approx. 0.82 kg.
Protection: Over-voltage, under-voltage, over-current, winding open circuit, and position deviation.
Non-volatile Storage: Configuration parameters stored in internal MCU FLASH.
Operating Temperature: 0°C to +40°C.
Operating Humidity: 20% RH to 90% RH.
TTL Serial Settings: 115200 bps; 8 data bits; 1 stop bit; no parity.

Mechanical Drawing: Detailed mechanical drawings are available for precise installation and integration.

Catalog excerpts

NEOTON MOTOR The 57BH75PS12IC is a pulse-controlled 57 mm integrated stepper servo with 1.2 N-m maximum output torque. Its integrated motor, drive and encoder arrangement supports clean installation for transfer, packaging and general automation axes using TTL pulse control. • TTL pulse / direction control • 24-60 VDC input and 1.2 N-m maximum output torque • 16 DIP-switch microstep settings plus software adjustment • 0.01-3000 rpm source speed range | SPECIFICATIONS Frame Size Integrated Body Length L Size Shaft Diameter Input Voltage Range Maximum Output Torque Communication Current Setting Encoder Feedback Phase Resistance Phase Inductance Rotor Inertia Weight Speed Range Microstep Setting Filter Frequency Protection Non-volatile Storage TTL pulse / direction control 0.2-3.2 A software adjustable; factory-matched motor: 4.0 A 4096 lines (16,384 counts) encoder feedback 0.44 D ±20% 16 DIP-switch settings; software adjustable positive integer at or above 200 Factory default 400 kHz; software adjustable Over-voltage, under-voltage, over-current, winding open circuit and position deviation Configuration parameters stored in internal MCU FLASH 115200 bps; 8 data bits; 1 stop bit; no parity

Open the catalog to page 1

MECHANICAL DRAWING — 57 MM PULSE INTEGRATED STEPPER SERVO NEOTON MOTOR | www.neotonmotor.com | [email protected] | Generated October 1, 2026

Open the catalog to page 2

All NEOTON MOTOR catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

About DirectIndustry

DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.

Are you a buyer?

Find the right product
Request For Quotation (RFQ)
Our brands
FAQ
Contact Us
Newsletter subscription

Are you a supplier?

Exhibit with us
Our services
Manufacturer account
Distributor Account

About Us

VirtualExpo Group
Our Partners
Recruitment
Testimonials