*mydirectindustry

Catalogs
NEOTON MOTOR
42BH67CA05IC_datasheet.pdf

42BH67CA05IC_datasheet.pdf

Product catalog summary

Overview: The 42BH67CA05IC is a CANopen integrated stepper servo designed for compact motion systems. It combines a motor, driver, and encoder with configurable settings for current, microstepping, and network address.

Key Highlights:

Maximum output torque of 0.48 N·m
Supports CANopen and TTL communication
Features 4096-line / 16,384-count encoder feedback
16-position DIP-switch for address setting
Compact body with a length of 66.5 mm

Specifications:

Model Number: 42BH67CA05IC
Frame Size: 42 mm (NEMA 17)
Integrated Body Length: 66.5 mm
Shaft Diameter: 8 mm
Input Voltage Range: 24–48 VDC
Maximum Output Torque: 0.48 N·m
Communication: CANopen, TTL
Current Setting: Adjustable from 0.2–3.2 A; factory-matched at 2.0 A
Encoder Feedback: 4096 lines (16,384 counts)
Phase Resistance: 1.35 Ω ±20%
Phase Inductance: 2.3 mH ±20%
Rotor Inertia: Approx. 77 g·cm²
Weight: Approx. 0.4 kg
Speed Range: 0.01 rpm to 3000 rpm
Microstep Setting: Software adjustable above 200; default at 4000
Address Setting: 16-position DIP-switch
Protection: Includes over-voltage, under-voltage, over-current, winding open circuit, and position deviation
Non-volatile Storage: Configuration parameters stored in internal MCU FLASH
Operating Temperature: 0°C to +40°C
Operating Humidity: 20% RH to 90% RH
TTL Serial Settings: 115200 bps; 8 data bits; 1 stop bit; no parity

Mechanical Drawing: Detailed mechanical drawings are available for the 42 mm CANopen integrated stepper servo.

Contact Information: For more details, visit www.neotonmotor.com or contact [email protected].

Catalog excerpts

NEOTON MOTOR The 42BH67CA05IC is a 0.48 N-m maximum-output-torque CANopen integrated stepper servo. It is intended for compact motion systems that benefit from a combined motor, driver and encoder with configurable current, microstepping and network address. • 0.48 N-m maximum output torque • 16-position DIP-switch address setting Frame Size Integrated Body Length L Size Shaft Diameter Input Voltage Range Maximum Output Torque Communication Current Setting 0.2-3.2 A software adjustable; factory-matched motor: 2.0 A Encoder Feedback Phase Resistance Phase Inductance Rotor Inertia Weight Speed Range 4096 lines (16,384 counts) encoder feedback Microstep Setting Software setting above 200; factory default 4000 Address Setting Protection Non-volatile Storage Over-voltage, under-voltage, over-current, winding open circuit and position deviation Configuration parameters stored in internal MCU FLASH 115200 bps; 8 data bits; 1 stop bit; no parity

Open the catalog to page 1

MECHANICAL DRAWING — 42 MM CANOPEN INTEGRATED STEPPER SERVO NEOTON MOTOR | www.neotonmotor.com | [email protected] | Generated October 1, 2026

Open the catalog to page 2

All NEOTON MOTOR catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

About DirectIndustry

DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.

Are you a buyer?

Find the right product
Request For Quotation (RFQ)
Our brands
FAQ
Contact Us
Newsletter subscription

Are you a supplier?

Exhibit with us
Our services
Manufacturer account
Distributor Account

About Us

VirtualExpo Group
Our Partners
Recruitment
Testimonials