*mydirectindustry

Catalogs
NEOTON MOTOR
28BH47CA008IP_datasheet.pdf

28BH47CA008IP_datasheet.pdf

Product catalog summary

Overview: The 28BH47CA008IP is a compact CANopen integrated stepper servo designed for small automation, conveying, and packaging subsystems. It integrates motor, drive, and encoder feedback into a single 28 mm body, simplifying power and signal wiring.

Key Highlights:

Supports CANopen and TTL interfaces.
Operates with a 9–36 VDC input and provides a maximum output torque of 0.065 N·m.
Features a 4096-line / 16,384-count encoder feedback.
Host-adjustable start address and can reach speeds up to 3000 rpm.

Specifications:

Model No.: 28BH47CA008IP
Frame Size: 28 mm (NEMA 11)
Integrated Body Length: 47.2 mm
Shaft Diameter: 5 mm
Input Voltage Range: 9–36 VDC
Maximum Output Torque: 0.065 N·m
Communication: CANopen, TTL
Current Setting: 0.2–3.2 A software adjustable; factory-matched motor: 1.0 A
Encoder Feedback: 4096 lines (16,384 counts)
Phase Resistance: 2.1 Ω ±20%
Phase Inductance: 2.1 mH ±20%
Rotor Inertia: Approx. 9 g·cm²
Weight: Approx. 0.15 kg
Speed Range: Up to 3000 rpm
Microstep Setting: Host configuration; positive integer above 200; factory default 4000
Address Setting: Factory default 1; start address adjustable by host software
Protection: Over-voltage, under-voltage, over-current, winding open circuit, and position deviation
Non-volatile Storage: Configuration parameters stored in internal MCU FLASH
Operating Temperature: 0°C to +40°C
Operating Humidity: 20% RH to 90% RH

Mechanical Drawing: Detailed mechanical drawings are available for precise integration and installation.

Contact Information: For more details, visit www.neotonmotor.com or contact sales at [email protected].

Catalog excerpts

NEOTON MOTOR The 28BH47CA008IP is a compact CANopen integrated stepper servo that brings motor, drive and encoder feedback into a single 28 mm body. It supports simplified power and signal wiring for small automation, conveying and packaging subsystems. • 9-36 VDC input and 0.065 N-m maximum output torque • Host-adjustable start address Frame Size Integrated Body Length L Size Shaft Diameter Input Voltage Range Maximum Output Torque Communication Current Setting Encoder Feedback Phase Resistance Phase Inductance Rotor Inertia Weight Speed Range Microstep Setting Address Setting Protection Non-volatile Storage 0.2-3.2 A software adjustable; factory-matched motor: 1.0 A 4096 lines (16,384 counts) encoder feedback Host configuration; positive integer above 200; factory default 4000 Factory default 1; start address adjustable by host software Over-voltage, under-voltage, over-current, winding open circuit and position deviation Configuration parameters stored in internal MCU FLASH

Open the catalog to page 1

MECHANICAL DRAWING — 28 MM CANOPEN INTEGRATED STEPPER SERVO NEOTON MOTOR | www.neotonmotor.com | [email protected] | Generated October 1, 2026

Open the catalog to page 2

All NEOTON MOTOR catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

About DirectIndustry

DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.

Are you a buyer?

Find the right product
Request For Quotation (RFQ)
Our brands
FAQ
Contact Us
Newsletter subscription

Are you a supplier?

Exhibit with us
Our services
Manufacturer account
Distributor Account

About Us

VirtualExpo Group
Our Partners
Recruitment
Testimonials