Q-MACS Process DC

Q-MACS Process DC

Product catalog summary
General Description
The document describes a dual path infrared spectrometer equipped with two IR-light sources. It offers high sensitivity down to the parts per billion (ppb) range and rapid response times down to milliseconds. The device can achieve time resolutions down to milliseconds, with sub-microsecond resolutions available upon request. The spectrometer measures 554 mm x 1229 mm x 600 mm and weighs 160 kg.
Components
The spectrometer comprises several key components: an optical board, an industrial PC with acquisition hardware, an electronic supply system, and a water cooling system.
Parameters
  • Power: Operates at 230 V with a maximum current of 2 A (switch-on current of 6 A) or 115 V with a maximum current of 4 A (switch-on current of 12 A).
  • Working Range: +5 °C to +40 °C.
Quantum Cascade Laser (QCL)
  • Tuning Method: Inter pulse mode (laser sweep mode) and intra pulse mode (single pulse mode).
  • Pulse Width: Ranges from 8 ns to 256 ns, depending on the QCL and QCL-voltage used, with longer pulses available on request.
  • Pulse Frequency: Up to 1 MHz.
  • Temperature Range: -35 °C to +40 °C.
  • QCL: Tested and installed.
Technical Specification
The Q-MACS Process DC is a portable monitoring system designed for online measurements of industrial processes where installation in the process room is not feasible. It employs mid-infrared absorption spectroscopic methods to determine absolute molecular concentrations. The system is based on the Q-MACS Basic and features a dual channel setup for simultaneous measurement of multiple species. Long-term stability for broad absorption features is enhanced through adapted normalization concepts.
Applications
The spectrometer provides solutions for operations in gases and plasmas.
See more

Catalog excerpts

Q-MACS Process DC-1

solutions for your operations in gases and plasmas Q-MACS Process DC technical specification The Q-MACS Process DC is a portable monitoring system for on-line measurements of industrial processes, where the measurement equipment’s installation in the process room is not possible. This open path system uses mid-infrared absorption spectroscopic methods to determine absolute molecular concentrations. It is based on the Q-MACS Basic and features a dual channel setup, which allows the simultaneous measurement of multiple species. The long-term stability for broad absorption features was improved by adapting normalization concepts. general description dual path infrared spectrometer with two IR-light sources response time time resolution down to milliseconds, sub-microsecond time resolution on request components parts ▪▪ optical board ▪▪ industrial PC with acquisition hardware ▪▪ electronic supply system ▪▪ water cooling system parameter power ▪▪ 230 V, max. 2 A (switch-on current 6 A) ▪▪ 115 V, max. 4 A (switch-on current 12 A) working range ▪▪ inter pulse mode (laser sweep mode) ▪▪ intra pulse mode (single pulse mode) pulse width 8 ns* … 256 ns** * depends on the QCL and QCL-voltage used ** longer pulses on request pulse frequency

 Open the catalog to page 1
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.
About DirectIndustry
DirectIndustry is a marketplace that offers B2B players a complete experience, from product sourcing to purchase. DirectIndustry is an entity of VirtualExpo Group.