neoplascontrol solutions for your operations in gases and plasmas The Q-MACS Basic CW is a compact high performance laser controller including TEC and laser current driver. The laser controller is applied to drive a single continuous wave (CW) laser with grounded cathode. The setup of the laser controller is realized via a RS232 interface allowing the configuration of the controller before using it with a laser. Adjustments of PID parameters, NTC beta value, TEC current limits, temperature guard values and custom commands are available via this communication interface. For autonomous operation and replacement in the field, all configuration parameters could be stored in an internal EEPROM. With its outstanding features the Q-MACS Basic CW became the fundamental component in various laser-based systems designed for the exclusive application of CW laser sources. It is a versatile laser driver system for various infrared absorption spectroscopic applications. Its robustness and compactness makes it the ideal choice for the integration as an OEM module into industrial products. supply voltage laser connector thermal management compact high performance single CW laser controller incl. current and TEC driver 125mm x 61mm x 105mm (LxHxD) without connectors <500 g 24 VDC <60 W @D-SUB7W5 male D-SUB9W7 female two fans in continious mode max. current max. compliance voltage avg. noise density RMS noise modulation bandwidth 20V (to be defined prior shipment) TEC driver and temperature controller max. TEC voltage max. TEC current control loop @D-SUB7W5 male TTL enable input 12V analog current setpoint 0V to 3,25V @SMA female transfer funktion 2,5V/A • controller board • housing incl. fans • connector cable for power supply and RS232 • basic PC software package for setup and operation operating temperature operating humidity storage temperature storage humidity neoplas control GmbH - Walther Rathenau Strafle 49a - 17489 - Greifswald - Germany - www.neoplas-control.de - [email protected]