Series 100P
1 / 2Pages

Series 100P Pressure Switch/Internal AdjustmentVersatile Nega-Rate Belleville disc spring pressure switch for a wide range of applications. Series 100P (diaphragm sensor) for pneumatic and low impulse hydraulics up to 3000 psig system pressure. Operating Pressure Data All values given in psig. Standard Specifications Bordering Sequence — Select desired option for each category Electrical Snap action electrical switch recognized by Underwriters' Laboratories, Inc. and CSA International 1/2 NPT female conduit connection with terminal block Wetted Material 1 1/4 NPT Female Wetted Material 4, 5, 7 and 9 1/2 NPT Female Temperature Range Media temperature limits change with O-Ring selection Concealed wrench flat adjustment with range scale Shipping Weight OPTIONS Wetted Material 1 Aluminum port, Teflon coated polyimide diaphragm and Buna-N O-Ring 4 316 stainless steel port, Teflon coated polyimide diaphragm and Buna-N O-Ring 5 316 stainless steel port and diaphragm heliarc welded 7 Hastelloy C port and diaphragm, heliarc welded (Except Range 1) 9 Monel port and inconel diaphragm heliarc welded (Except Range 1) Adjustable Range to 75 psig inc. to 150 psig inc. to 300 psig inc. to 600 psig inc. to 1500 psig inc. to 2800 psig inc. Electrical Form 3 Meets or exceeds the requirements of IP65, NEMA Type 3, 3R, 3S, 4, 4X and 13 A Epoxy paint exterior — extra protection for severe environments B Viton O-Ring D SIL approval and marking, per IEC61508 (includes FMEA report) E 7/16" - 20 SAE port (Wetted Material 1 Only) F Fire fuse — for fire-tested equipment (Wetted Material 4 & 5 only) J Annealed stainless steel port screws for H2S environments (Wetted Materials 4 and 5 only) — Consult factory for reduced system and proof pressure L Neon indicator light — 115 VAC M Gold electrical contacts for extremely low current applications - (Not with Z Form) P 5-Pin Brad Harrison connector (Reduce AC electrical rating to 8 amps — (Not for CC3 Electrical) S Stainless steel diaphragm (Wetted Material 4 only) U M20 x 1.5 Electrical Conduit Adapter W Stainless steel screws — exterior (Standard with Wetted Materials 4, 5, 7 and 9) X UL and CSA Approved and CE Mark (Not available with L or P option) Y 2" NPT Female port for viscous medias. Port Material is carbon steel (Wetted Material "3”) (Not available in range code "1”) — Order as 100P3xxxxY Special (Consult representative or factory) • Non-catalog adjustable range and/or set point, deadband and proof pressure • Media temperature capability from -65°F to +400°F • Chemical seals installed • Manual reset — decreasing only (available in C3 only) Ordering Procedure ■ When factory presetting is desired, stipulate set point, increasing or decreasing ■ Insert available option number or letter designation as required Wetted Material Adjustable Range Electrical Form Enclosure Miscellaneous

Field Adjustable 2.3 to 2800 psig Pressure Switch / Internal Adjustment Envelope Dimensions Electrical Form FORM "C" (SPDT) FORM "Z" (DOUBLE BREAK) Basic Principles of Design Neo-Dyn® 28150 Industry Drive Valencia, CA 91355 tel: 864-647-9521 fax: 864-647-9574 www.neodyn.com An ITT Company AER0935R2 6/22 Specifications and dimensions subject to change.