The configuration of modules will be similar to 600A which are aimed for the toughest applications, for example handling a lot of abrasive and heavy material. The robustness of the unit and the power from the reliable ejector makes the unit very suitable for many applications where many industrial vacuum cleaners can not be used. For example to collect blasting material in blasting hall, sand recovery in foundries etc. Your unit can be configured to meet your specific demands. Different ejectors can be used depending on the demand but also the availability of compressed air. The ejector can be placed on a stationary silo with filter. A range of different discharge valves that can be fitted to the silo for easy discharge of the collected material. If handling larger quantities of material, Nederman recommends using a pre separator before the vacuum unit. To configure your 600A you may only choose ejectormodule, filtermodule, silomodule and discharge valve listed in this document and with mfc (module for configuration) in title. 1. Select ejectormodule depending on required vacuum and air flow. 2. Select filtermodule depending on filter capacity. 4. Select discharge valve. 5. Select cleaning equipment. Choose how to control your butterfly valve: 1. Electric controlled - You need a namur valve, solenoid valve recommended for the ejector size you choose and a control box. 2. Air controlled - You need a namur valve. Hose for air supply to the namur valve is not supplied by Nederman. Ensure that all requirements for the modules are met. The height of your configuration is depending on what filtermodule and legs you choose. • Robust and efficient self-cleaning filter • Very powerful and reliable ejector as vacuum producer • Suitable for heavy and/or abrasive material • Control system with many different functions is available as an accessory Product name Granulate Grit Chip Dust This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB www.nederman.com 1

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB www.nederman.com 2

Image Description C<requi^ernetniair Max airflow (m3/h) Noise level (dB(A)) Max (in' Weight (lbs) Note Model Recommended with filtermodule 43162101 **Recommended with filtermodule 43164101 ***Each configuration needs the quantity of three legs, so to get a complete product you need to order three pieces of chosen number ****To be used with 43756100, order three pieces This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB www.nederman.com

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB www.nederman.com 4

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB www.nederman.com 5

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB www.nederman.com 6

*Ø150mm Housing and flap in PA. Temp range -20C to +40C. Height: 155 mm (240 mm in open position) **Ø125mm Housing in NBR, Epoxy coated cast iron and flap/sleeve i stainless steel. Temp range -20C to +120C. Height: 110 mm (260 mm in open position) ***Recommended with 43630100 ****Can be used with valves 43630300, 43632001, 43632100, 43630201 *****Couplings included, Ø 51 mm ******ATEX: Suitable for combustible dust with MIE (minimum ignition energy) < 1mJ. Ensure earthing to extraction unit. Not to be used in combustible gas atomspheres or extraction of explosive materials *******ATEX: This product...

mmWC kPa All performance data are based on 7 bar supply pressure This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB www.nederman.com 8

Dimensions with 1 500 mm legs This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB www.nederman.com