570A, Configurable A powerful dust collector, excellent high vacuum for suction over long horizontal and vertical distances The configuration of modules will be similar to 570A which are aimed for the toughest applications, for example handling a lot of abrasive and heavy material. The robustness of the unit and the power from the reliable ejector makes the unit very suitable for many applications where many industrial vacuum cleaners can not be used. For example to collect blasting material in blasting hall, sand recovery in foundries etc. Your unit can be configured to meet your specific demands. Different ejectors can be used depending on the demand but also the availability of compressed air. The ejector can be placed on a mobile silo with filter, with wheels and forklift slots. Nederman has a range of different discharge valves that can be fitted to the silo for easy discharge of the collected material. If handling larger quantities of material, Nederman recommends using a pre separator before the vacuum unit. See Nederman Engineering Guide for more information. Use modules linked to 570A, configurable product only. You may only choose ejectormodule, filtermodule, silomodule and discharge valve 1. Select ejectormodule depending on required vacuum and air flow. 2. Select filtermodule depending on filter capacity. 3. Select silomodule. 4. Select discharge valve. 5. Select cleaning equipment. Ensure you meet all requirements for your modules. Control system with many different functions is available as an accessory The height of your configuration is depending on what filtermodule you choose. • The configuration of modules will be similar to 570A which are aimed for the toughest applications, for example handling a lot of abrasive and heavy material. The robustness of the unit and the power from the reliable ejector makes the unit very suitable for many applications where many industrial vacuum cleaners can not be used. For example to collect blasting material in blasting hall, sand recovery in foundries etc. Your unit can be configured to meet your specific demands. Different ejectors can be used depending on the demand but also the availability of compressed air. The ejector can be placed on a mobile silo with filter, with wheels and forklift slots. Nederman has a range of different discharge valves that can be fitted to the silo for easy discharge of the collected material. If handling larger quantities of material, Nederman recommends using a pre separator before the vacuum unit. See Nederman Engineering Guide for more information. This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB www.nederman.com

Use modules linked to 570A, configurable product only. You may only choose ejectormodule, filtermodule, silomodule and discharge valve 1. Select ejectormodule depending on required vacuum and air flow. 2. Select filtermodule depending on filter capacity. 4. Select discharge valve. 5. Select cleaning equipment. Ensure you meet all requirements for your modules. Control system with many different functions is available as an accessory The height of your configuration is depending on what filtermodule you choose. • Robust and efficient self-cleaning filter • Robust and efficient self-cleaning filter •...

Image Description C<requi^ernetniair Max airflow (m3/h) Noise level (dB(A)) Max (in' Weight (lbs) Note Model This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB www.nederman.com

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB www.nederman.com 4

This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB www.nederman.com 5

*015Omm Housing and flap in PA. Temp range -20C to +40C. Height: 155 mm (240 mm in open position) **0125mm Housing in NBR, Epoxy coated cast iron and fap/sleeve i stainless steel. Temp range -20C to +120C. Height: 110 mm (260 mm in open position) ***Couplings included, 0 51 mm ****ATEX: Suitable for combustible dust with MIE (minimum ignition energy) < 1mJ. Ensure earthing to extraction unit. Not to be used in combustible gas atomspheres or extraction of explosive materials *****ATEX: This product is suitable to be used as cleaning equipment for combustible dusts with MIE (minimum ignition energy)...

Air powered ejectors pressure / flow diagram Air Powered ejectors All performance data are based on 7 bar supply pressure Capacity (tonne/hour) with Blasting media 2,4kg/liter and 20m hose The height of the configuration is depending on filtermodule choosen. This content is protected under copyright law, furnished for informational use only, and subject to change without notice. © Nederman Holding AB www.nederman.com