HL63373HD 638nm /1.0W (CW) /1.2W (Pulse) AlGaInP Laser Diode
4Pages

Data Sheet HL63373HD 638nm /1.0W (CW) /1.2W (Pulse) AlGaInP Laser Diode Internal Circuit Visible light output: 638 nm Typ. Show Laser Optical output power: 1.0W (CW) Light source of optical equipment High wall-plug efficiency: 41% Multi transverse mode High heat dissipation 9mm CAN package

Absolute Maximum Ratings (Tc=25°C) Item Operating Temperature Storage Temperature Optical output power Pulse optical output power Note1) Operating temperature is defined by Case temperature “Tc”. High increase in temperature of LD chip itself is expected during operation due to high current density. Thus, without proper heat dissipation, it is observed that no specific output power is achieved or it results to LD degradation. It is advised that sufficient measure of heat dissipation should be taken so that LD’s maximum operating temperature is not exceeded during actual operation. Note2)...

Cautions 1.Ushio Inc.(Ushio) neither warrants nor grants licenses of any our lights or any third party’s patent, copyright, trademark, or other intellectual property rights for information contained in this document, Ushio bears no responsibility for problems that may arise with third party’s right, including intellectual property rights, in connection with use of the information contained in this document. 2. Products and product specifications may be subject to change without notice. Confirm that you have received the latest product standards or specifications before final design,...

Disclaimer Product specifications and data shown in this product catalog are subject to change without notice for the purposes of improving product performance, reliability, design, or otherwise. Product data and parameters in this catalog are typical values based on reasonably up-to-date measurements. Product data and parameters may vary by user application and over time. Products shown in this catalog are intended to be used for general electronic equipment. Products are not guaranteed for applications where product malfunction or failure may cause personal injury or death, including but...