DP Series 100 - 300 KVA

Product catalog summary

Overview
The DP Series is a range of Uninterruptable Power Supply (UPS) systems designed for high-powered, three-phase loads. These systems are suitable for various industrial applications and are backed by a one-year warranty.

Technical Specifications

Input: 220/380 VAC, 3 Phase + Neutral, with a voltage tolerance of ±20% and a frequency of 50 Hz (60 Hz optional).
Output: Voltage tolerance for balanced load is ±1%, unbalanced load ±2%, and instantaneous load ±5%. Frequency tolerance is ±2% synchronized to the network and ±0.2% free running.
Efficiency: Ranges from 90% to 92% at full load.
Protection: Includes electronic input tolerant protection, overload protection, short circuit protection, and over-temperature protection.
Battery: Dry-type with electronic voltage tolerant protection, automatic circuit breaker, and a discharge-end voltage of 300-320 VDC.
General Options: Features include forced air cooling, IP 20 protection class, and operation height below 1000 meters above sea level.
Communication: Equipped with RS232, dry contact, SNMP, MODBUS, RS485, and remote panel options.

Physical Characteristics

Weight ranges from 710 kg to 1416 kg depending on the model.
Dimensions vary from 1100x1650x800 mm to 1565x1880x925 mm.
Noise levels are between 65 dBA and 70 dBA.

Additional Features

Parallel operation capability with a 1+3 system for hot standby, redundancy, and power increase.
Includes T-Mon UPS software for up to three users.

Catalog excerpts

Service of safety Products of DP Series (3-phase input - 3-phase output) have been designed and produced in order to support the loads which are high powered and demand 3 phases reliably. DP Series guarantee a background and a quality both have been proved in every section of industry and under all kinds of working conditions. Uninterruptable Power Supply & Data Center Infrastructure Solutions www.necron.com.tr/en | [email protected]

Open the catalog to page 1

Technical specifications Voltage Frequency EN50091-2 Class A Electronic Input Tolerant Protection 80KW (balanced load ± 1%) (unbalanced load ± 2%) (instantaneous load ± 5%) Voltage Recovery Time Frequency OUTPUT Voltage Tolerance Frequency Tolerance ± 2% to the Network Synchronized, ± 0.2% Free Running Crest Factor Overload Protection 100% - 125% Load : 10 Minute, 125% - 150% Load : 1 Minute > 150% Load : Bypass Short Circuit Protection Electronic Short Circuit Protection Voltage Protection Electronic Out of Tolerant Protection Linear Load: < 3% | Non-Linear Load: < 5% Number of Battery BATTERY...

Open the catalog to page 2

DP Series 100 - 300 KVA

DP Series 100 - 300 KVA

Catalog excerpts

All NECRON Energy TURKEY catalogs and technical brochures