3C Series 10-15-20 KVA

Product catalog summary

Overview: The 3C Series UPS by Necron is designed for high-tech devices used in various sectors and mid-sized offices. It incorporates DSP (Digital Signal Processing) technology for enhanced performance and quick response to unbalanced loads.

Specifications:

Power: Available in 10, 15, and 20 KVA models, with power factors greater than 0.98.
Input: 380 VAC, 3 Phase + Neutral with voltage tolerance of 304 ~ 478 VAC ± 3 Phase.
Output: Sinusoidal voltage waveform with a total harmonic distortion (THD) of ≤ 5% for non-linear loads.
Battery: Uses 20 pieces of dry type or optional external batteries with a nominal charging voltage of 240 VDC ± 1%.
Efficiency: Total efficiency at 100% load is ≥ 90%.

Protection and Alerts:

Electronic short circuit protection and overload capacity of 105%~130% load for 10 minutes.
Audible warnings for battery operation, low battery, and UPS faults.
Communication via RS232 with optional SNMP or AS400 support.

Environmental and Physical Characteristics:

Operating temperature range of 0 ºC ~ 40 ºC with humidity levels of 20% ~ 90% (non-condensing).
Storage temperature range of -25 ºC ~ 70 ºC.
Dimensions: 260x717x570 mm, with a weight of 169 kg.

Standards and Compliance: Complies with EN 59001-2, 62040-1-1, 62040-2, 61000-2-2, 61000-4-2, 61000-4-3, 61000-4-4, 61000-4-5 (Surge).

Catalog excerpts

High Productive online power protection C Series UPS is designed for developed devices with high technology that using at miscellaneous sectors and mid-sized office usage. DSP (Digital Signal Processing) which had the most advanced control technology is used at this UPS. Consequently, it has obtained high performance and removed function loss causing by unbalanced loads in systems, when enhancing speedy of response for UPS. Uninterruptable Power Supply & Data Center Infrastructure Solutions www.necron.com.tr/en | [email protected]

Open the catalog to page 1

Technical specifications 3 Units Working in Parallel Number of Phase and Voltage Voltage Tolerance Power Factor Current (maximum) Power Factor Range Voltage and Voltage Tolerance Dynamic Response Correction Time OUTPUT Frequency and Frequency Range Voltage Wavefrom Total Harmonic Distortion (THD) Crest Factor Overload Capacity 105%~130% Load 10 Min, > 130% Load 1 Sec., After the By-Pass Transfer, 1 Min. After the Closure (network mode) Short - Circuit Protection By-Pass and the Transfer Time Electronic Short Circuit Protection Standart Static By-Pass, Network to Battery Mode, Inverter Uninterruptible,...

Open the catalog to page 2

3C Series 10-15-20 KVA

3C Series 10-15-20 KVA

Catalog excerpts

All NECRON Energy TURKEY catalogs and technical brochures