GET - Temporary Protective Ground tester

Product catalog summary

Introduction
The GET-40 is a Temporary Grounding Jumper Tester designed for use with the DRM-40 micro-ohmmeter. It employs a four-point measuring method to ensure accuracy and is compatible with various micro-ohmmeter instruments from ndb Technologies.

Operation
Regular testing of Personal Protective Grounding Equipment is crucial to ensure safety and compliance with protection requirements. The GET-40 facilitates this by providing quick and reliable test results, confirming the condition of Protective Grounding Sets.

Advantages

Ensures integrity of Protective Ground Sets.
Features an exclusive measurement technique that evaluates clamp contact.
Compatible with various clamp types, including Duck Bills, "C" clamps, ball socket clamps, and flat jaw clamps.
Fully automatic and microprocessor-based, requiring no calculations.
Complies with ASTM standards for testing.

Versatility
The GET-40 is a portable, battery-powered device that guarantees the condition of Protective Grounding Sets through resistance measurement. It is designed to work with DRM/LRM micro-ohmmeters for precise low-resistance readings and can be adapted for various applications with the appropriate accessories.

Troubleshooting
If a Ground Jumper exhibits high resistance, the GET-40 can help identify the flaw within the jumper assembly, facilitating efficient troubleshooting.

Catalog excerpts

GET - Temporary Protective Ground tester-1

GET-40 Temporary Grounding Jumper Tester The GET-40 device is an easy-to-use and accurate Grounding Jumper Tester using four points measuring method. It is compatible with any of our DRM/LRM micro-ohmmeter instrument. ADVANTAGES Guarantees your Protective Ground Set integrity Exclusive measurement technique including clamps contact evaluation Compatible with Duck Bills, ‘‘C’’ clamps, ball socket clamps, flat jaw clamps, etc... Adaptable to other type of clamps or connec tors Full automatic, microprocessor based VERSATILITY Resistance measurement guarantees that Protective Grounding Sets are in good condition. This portable kit is battery-powered, easy to use and versatile. It is intended to be used with any our DRM/LRM micro-ohmmeter (DRM-1A, DRM-40, DRM-10A & LRM-10) for precise readings in the very low resistance ranges. The DRM/LRM micro-ohmmeter can also be used on a large variety of applications when paired with the proper accessory. No need to buy another instrument, the DRM/LRM can do it all! One reading, no calculation required Testing as per ASTM standards Found a Ground Jumper with a high resistance? No problem, the GET-40 allows you to locate the flaw in the jumper assembly. OPERATION Personal Protective Grounding Equipment should be tested periodically to ensure it meets protection requirements. The integrity of a Protective Grounding Equipment should never be assumed. Putting in place a regular maintenance program, the condition of a Protective Grounding Set can be confirmed quickly. Comparing the test result indicates if the equipment is still safe to be used. GET-40 GET-40 device paired with the DRM-40 micro-ohmmeter ndb Technologies inc. • 1405 St-Jean-Baptiste, office 111 • Quebec (QC) G2E 5K2 - Canada • Tel: 1(418)877-7701 Fax: 1(418)877-7787 Email: [email protected]

Open the catalog to page 1

All Ndb Technologies catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list