Group: China Iron & Steel Research Institute Group
Catalog excerpts
National Science and Technology Project of significant scientific instrument & Equipment Development >>>>>>>> @ NCS TESTING TECHNOLOGY CO.,LTD.
Open the catalog to page 1Inductively coupled plasma mass spectrometer Known as the most exciting analysis technology since the 20th century. ICP-MS {Inductively coupled plasma mass spectrometry) has become one of the most effective analytical approaches for trace and ultra trace analysis on the strength of its low detection limit, low interference, high analysis accuracy, fast analysis speed, simultaneous determination of multi-elements and other outstanding analysis capabilities. Under the support of National Science and Technology Project of significant scientific instrument & Equipment Development administrated...
Open the catalog to page 2Systematic application solutions and analytical methods has been established with PlasmaMS 300. to fulfill analysis and testing requirements for heavy metal elements in surface water, waste water, soil, sediment, particulate matters in atmosphere {waste gas), solid waste and environmental samples. As the most powerful technology for multi-element analysis of geological samples, PlasmaMS 300 featured with high sensitivity, good accuracy and strong anti-interference capability can meet the demands for rapid and accurate multi-element analysis of "Three rare' mineral elements (rare element,...
Open the catalog to page 3Quadrupole Analyzer Stable and good performances come from excelsior design From partial to overall layout. PlasmaMS 300 is elaborately designed and the durability of instrument is guaranteed by optimization through the adoption of simulation and experiment and reliability demonstration with reference to national and military specifications High throughput quadrupole (analysis mass range 1 -265amu) can totally meet the demands for high resolution l< 0.8 amu) element analysis Through the application of world's leading quadrupole RF power supply technology and DOS (Direct Digital Frequency...
Open the catalog to page 427.12 MHz Inductively Coupled Plasma RF generator By using the solid-state RF generator with extremely high power stability and good shielding design. PlasmaMS 300 can ensure the stability of ion source and signal In addition the adoption of precisely-controlled three-dimensional platform realizes the automatic positioning and calibration of the torch. Flexible switching of sampling introduction methods The ports for coupling with such external sampling devices as laser ablation and liquid chromatography are provided, the assembly space for semiconductor cooling device is reserved and HF...
Open the catalog to page 5Concise, intuitive, easy to use PlasmaMS 300 File(F) Edil(E) Operation(O) Tool(T) Window(W) Help<H) Configuration of experimental conditions Standard curve plotting and sample concentration calculation Edit. save, export and print of test report
Open the catalog to page 6Excellent Analysis Capabilities Powerful coupling technology User-friendly Operation Process Convenient Maintenance PlasmaMS 300 With sturdy and durable RF power supply, vacuum system with emergency protection and the automatic control system, and intelligent one-key operation for completing analysis and configuration. PlasmaMS 300 eliminated the human disturbance, guarantee the consistency and excellent repeatability of the instrument. The solid-state ICP source with excellent matching function can effectively limit the ion diffusion during ionization process and guarantee the focusing...
Open the catalog to page 7PlasmaMS 300 Application in the Field of Food AnalysisDetermination of trace heavy metals in rice samples In this experiment, the reference materials of GSB-22 and GBW08503b for biological component analysis are used and the reference material for rice analysis of NCS is taken as the to-be-tested sample, for the purpose of determining harmful elements of Cd, Pb, As and Cr. The experimental results show that the measured values of all elements are well consistent with that of certified values. This application shows that PlasmaMS 300 possesses good sensitivity and excellent accuracy and...
Open the catalog to page 8Determination of trace impurities in Cobalt Carbonate powder In this experiment. Cobalt Carbonate powder sample is used to determine the impurity elements of Al. Cd. Cr, Cu. Mg. Mn. Zn, Pb. Through the application of PlasmaMS 300. the test is conducted by taking 50% Co as matrix. 20ppb of Sc.Rh.Re as internal standard. The experimental results show that PlasmaMS 300 can fully meet the demands for trace elements testing in minerals,
Open the catalog to page 9In this experiment, the performance of the LA-ICP-MS independently developed by NCS has been tested for metal analysis with standard materials. 5 pieces of low alloy steel standard samples in GSBH40068-93 is taken as the experimental samples. Among the standards, No. 1,2 ,4 and 6 in GSBH40068-93 standard samples are taken to plot the calibration curve and No. 5 sample as the to-be-tested sample. Content Accuracy Comparison of All Elements Non-planar material fracture Isotope Coupled with laser ablation sampling system (LA 300), PlasmaMS 300 can realize solid-state direct sampling and reduce...
Open the catalog to page 10PlasmaMS 300 Speciation analysis of organic arsenic and inorganic arsenic in dried shredded squid **MgA
Open the catalog to page 11NCS Testing Technology CO., Ltd. (hereinafter referred to as NCS) is the wholly owned subsidiary of China Iron & Steel Research Institute Group (CISRI). The main businesses of NCS involve third-party testing services (including the chemical composition testing, mechanical property testing, material failure analysis, nondestructive testing and measurement calibration), development and sales of analysis and testing instruments, nondestructive testing equipments, anti-corrosion products and related engineering, certified reference materials, proficiency testing and other fields. It possesses...
Open the catalog to page 12All NCS Testing Technology Co. catalogs and technical brochures
-
SparkCCD 6000
8 Pages
-
Plasma 3000 ICP-OES
4 Pages
-
Product Brochure of NCS
28 Pages
-
Plasma2000 Full-spectrum ICP-OES
12 Pages
-
OPA-200
12 Pages
-
Plasma 1000
8 Pages
-
NCS-CEMS
12 Pages
-
NCS-NMHC-1000
2 Pages
-
O-3000 Oxygen Analyzer
8 Pages
-
Testing Machine
24 Pages