O-3000 Oxygen Analyzer
8Pages

Series Oxygen Analyzer O- 3000 >>>>:::: @ NCS TESTING TECHNOLOGY CO.,LTD.

About Us NCS Testing Technology CO., Ltd. (hereinafter referred to as NCS) is the wholly owned subsidiary of China Iron & Steel Research Institute Group (CISRI). It is the New and High-tech Enterprise and found by the business integration of National Analysis Center for Iron and Steel, China National Center for Quality Supervision and Testing of Iron and Steel, Analysis and Testing Institute of Central Iron & Steel Research Institute, National Nondestructive Testing Center for Steel Products, Analysis and Testing Training Center of Central Iron & Steel Research Institute, Qingdao Marine...

Instrument Introduction NCS Testing Technology Co., Ltd. is a high-tech enterprise, which was established by China Iron & Steel Research Institute Group, and it has a strong technical force in production and development. O-3000 Series Oxygen Analyzer is a new product, and it is used for oxygen determination in ferrous and non-ferrous metals, rare earth materials, alloy, and some other inorganic materials。 NCS TESTING TECHNOLOGY CO.,LTD.

0-3000 Series Oxygen Analyzer I.Introduction: Pulse heating inert gas fusion. O (Oxygen): NDIR(Non Dispersive Infrared absorption); 2.Working Curve: Working curve for oxygen 3. Main Analysis Window:

O-3000 Series Oxygen Analyzer 1. Low Oxygen： 0.0001% - 0.5%;High Oxygen: 0.5% - 20%； 2. Sensitivity： O: 0.01ppm； 3. Repeatability： O: 1ppm or 1%； 4. Sample mass： 1g (Sample mass can be changed according to the content) 5. Analysis time: about 3 min 6. Carrier gas: High purity argon for O 7. Pneumatic gas: Nitrogen 8. Structure: Modular Structure, including analyzer, computer, electronic balance*, printer*, water circulate chillers*. Note: * is optional. 9. Detection system: Solid state Infrared detector is used for Oxygen. Infrared Cells: Two IR cells are installed in the analyzer. The...

O-3000 Series Oxygen Analyzer 1 . Parameters of outgassing, analyzing, flux etc can be setup according to the sample characteristic. 2. Analyzing method with parameters and calibration curve can be established separately according to different samples and can be stored into the database. 1) Cooling water temperature feedback and display 2) Voltage and current of the furnace feedback and display 3) Catalyst heaters temperature feedback and display 4) Valves action feedback and display 5) IR baseline baseline adjustment and display 6) Furnace adjustment 1） Analyzing results can be display...

O-3000 Series Oxygen Analyzer Instrument Production Workshop NCS TESTING TECHNOLOGY CO.,LTD.

High-quality Creates Better Life Address: No.13, Xie Jie, Gaoliangqiao, Haidian District, Beijing Zip Code: 100081 Tel: +86(010)62182188 Fax: +86(010)62182155 Website: http://www.ncschina.com E-Mail: beijing@ncschina.com