CS-3000 Carbon Sulfur Analyzer
8Pages

Carbon/Sulfur Analyzer CS-3000 Eleventh Five-Year Plan national research programs of major projects of Scientific instrument research and development >>>>>>>>

About Us NCS Testing Technology CO., Ltd. (hereinafter referred to as NCS) is the wholly owned subsidiary of China Iron & Steel Research Institute Group (CISRI). It is the New and High-tech Enterprise and found by the business integration of National Analysis Center for Iron and Steel, China National Center for Quality Supervision and Testing of Iron and Steel, Analysis and Testing Institute of Central Iron & Steel Research Institute, National Nondestructive Testing Center for Steel Products, Analysis and Testing Training Center of Central Iron & Steel Research Institute, Qingdao Marine...

NCS Testing Technology Co., Ltd. is a high-tech enterprise, which was established by China Iron sc Steel Research Institute Group, and it has a strong technical force in production and development. CS-3000 Series Carbon/Sulfur Analyzer is used for simultaneous carbon, sulfur determination in ferrous and non-ferrous metals, semiconductors, electronic materials, rare earth materials, ores, ceramics, coal, graphite, and some organic materials. CS-3000 Series are perfect for both production and research environments. CS-3000 Series provide fast and accurate results for samples of all sizes by...

CS-3000 Carbon/Sulfur Analyzer Instrument Introduction CS-3000 is a high-end、 modular device， and it equipped with high frequency induction furnace. The analyzer has a wide measuring range, and it is suitable for a variety of samples. The carrier gases of induction furnace and resistance furnace pass through one infrared detection system. Instrument Principle Carrier gas (Oxygen) pass through sample extraction unit. Sample combustion at a high temperature, the carbon and sulfur in the sample were converted to CO2 and SO2.and then the mixed gas was measured by infrared detector. The infrared...

Main technical parameters Range: LC: 0.0001% - 0.2% HC: 0.2%- 6% LS: 0.0001% - 0.3% HS: 0.3% - 30% * Measure scope can be extended by changing sample weight. Sensitivity (the minimum reading ): C & S: 0.01ppm Repeatability: LC: SD>1ppm or RSD>1% HC: RSD<0.5% LS: SD>1.5ppm or RSD>1.5% HS: RSD<1.5% Analysis time: 30 s ~ 40 s Sample mass: 0.2 g ~ 0.5 g Carrier gas: Oxygen: purity >99.5%, pressure 0.30 MPa, pressure of furnace end 0.05MPa, 3L/min Pneumatic gas: Nitrogen or compressed air (purified); pressure imported 0.30 MPa Chemical reagent: Magnesium perchlorate, Ascarite Power...

Software interface pictures: Main analysis window

Instrument Production Workshop NCS TESTING TECHNOLOGY CO.,LTD.

High-quality Creates Better Life Address: No.13, Xie Jie, Gaoliangqiao, Haidian District, Beijing Zip Code: 100081 Tel: +86(010)62182188 Fax: +86(010)62182155 Website: http://www.ncschina.com E-Mail: beijing@ncschina.com