Catalog excerpts
SAMPLERS ECS 80 SERIES ECS 40 SERIES
Open the catalog to page 1
The pneumatic autosampler PN150 enables you to overlay up to three carousels for a total of 147 samples simultaneously loaded. A line of compressed air drives the movement of the piston that drops the capsule within the combustion reactor. Before dropping into the reactor the sample dwells in a conditioning chamber where a stream of helium ensures the elimination of atmospheric nitrogen introduced during loading. Once dropped in the reactor, the next sample is automatically introduced into the conditioning chamber. The autosampler sample holes are 11.5 mm in diameter. They can, therefore,...
Open the catalog to page 2
Electronic Autosampler "Zero Blank" The autosampler movements are electronically controlled by a micro stepper motor. There are three carousels available with respectively 32, 50 and100 positions. The "Zero Blank" is completely sealed and a "purge" system ensures the elimination of any "nitrogen residual" which makes it particularly suitable for use in the analysis of isotopes. Isolation valve: optional item for the Autosampler "Zero Blank". It allows to minimize system changes during sample loading. Equipped with a "purge" line separate from the line of the “carrier” gas, the isolation...
Open the catalog to page 3
Manual Sampler The manual sampler is the right solution when a low number of samples have to be analyzed, combining efficiency and good stability to low costs.
Open the catalog to page 4All NC Technologies catalogs and technical brochures
-
ECS802411 Pages
-
ECS802211 Pages
-
EA ID MICRO16 Pages
