MST -C / MSTS-C
1Pages

Catalog excerpts

Flexible Couplings - Slit Type - Clamping Type Zero Backlash Stainless steel MST-C Made of aluminum alloy MSTS-C Made of all stainless steel Standard Bore Diameter D1-D2 ◀2 Max. Lateral Max. Angular Max. Axial Mass ＊2 Misalignment Misalignment Misalignment (g) (mm) (° ) (mm) Static Torsional Stiffness (N・m/rad) Max. Bore Part Number Diameter (mm) Screw Tightening Torque (N・m) Part Number MSTS-C Made of all stainless steel ＊1：　Correction of rated torque due to load fluctuation is not required. The shaft's slip torque may be smaller than the coupling's rated torque depending on the shaft bore. ➡ P.xxxx ＊2：　These are values with max. bore diameter. 6 - 6.35 All products are provided with hex socket head cap screw. Recommended tolerance for shaft diameters is h6 and h7. ＊1：　Only MST-**C is a standard product. For MSTS-**C , use the additional modification service BT . ➡ P.xxxx ●● In case of mounting on D-cut shaft, be careful about the position of the D-cut surface of the shaft. ➡ P.xxxx MST-C has variable slit shapes depending on the size. See the Slit Details. There are sizes where the hex socket head bolt exceeds the outer diameter of the coupling and the rotating diameter is larger than the outer diameter. Please be careful of the interference of coupl

Open the catalog to page 1

MST -C / MSTS-C 1Pages

Catalog excerpts

All NBK (Nabeya Bi-tech Kaisha) catalogs and technical brochures

MST -C / MSTS-C
1Pages