NBC Elettronica
33Pages

1.0 LOAD CELLS MODELLO OFF CENTER LOAD CELLS Capacity Platform (mm) Material Protection class ATEX Class Capacity Platform (mm) Material Protection class OIML R60 Class ATEX Class Capacity Platform (mm) Material Protection class ATEX Class Capacity Platform (mm) Material Protection class OIML R60 Class ATEX Class Capacity Platform (mm) Material Protection class OIML R60 Class ATEX Class Capacity Platform (mm) Material Protection class OIML R60 Class ATEX Class Capacity Platform (mm) Material Protection class OIML R60 Class ATEX Class

SHEAR BEAN LOAD CELLS MODELLO Capacity Material Protection class OIML R60 Class ATEX Class Capacity Material Protection class OIML R60 Class ATEX Class Capacity Material Protection class ATEX Class Capacity Material Protection class OIML R60 Class ATEX Class

1.0 LOAD CELLS MODELLO COMPRESSION LOAD CELLS Capacity Material Protection class ATEX Class Capacity Material Protection class ATEX Class Capacity Material Protection class OIML R60 Class ATEX Class Capacity Material Protection class OIML R60 Class ATEX Class Capacity Material Protection class ATEX Class Capacity Material Protection class ATEX Class

PIN LOAD CELLS MODELLO CARATTERISTICHE Capacity Material Protection class ATEX Class On request On request On request II 3D (Zone22)

1.0 LOAD CELLS MODELLO FLANGE LOAD CELLS Capacity Material Protection class ATEX Class Capacity Material Protection class ATEX Class

TENSION LOAD CELLS MODELLO Capacity Material Protection class ATEX Class Capacity Material Protection class ATEX Class Capacity Material Protection class ATEX Class Capacity Material Protection class OIML R60 Class ATEX Class

1.0 LOAD CELLS MODELLO FLEXION LOAD CELLS Capacity Material Protection class OIML R60 Class ATEX Class Capacity Material Protection class OIML R60 Class ATEX Class

TORQUE TRANSMITTERS MODELLO Capacity Material Protection class ATEX Class Capacity Material Protection class ATEX Class

LOAD LIMITING DEVICES CARATTERISTICHE SET 07 is a load limiting device which permits: - limitation of the detected load through alarm and pre-alarm levels. - overload control with double-security system by connecting two units. - limitation of load (single and sum) for weighing systems up to 4 points, by connecting more units. - load cell fail alarm. - set-up and calibration via keyboard and display board removable. DSET 01 is a load limiter designed for connection with the pin load cell . The limitation of the load is implemented by means of two relays with safety function, the threshold...

ANALOGIC TRANSMITTERS MODELLO ANA 126R is an analog signal transmitter: 0÷10 V / ± 10V / 4 ÷20 mA, provided of a standard container for mounting on DIN rail which permit the weight calibration via trimmer and dip switches. AMAV 02 is an analog signal transmitter: 0÷10 V / 4 ÷20 mA, provided of a standard container for mounting on DIN rail which permit the weight calibration via trimmer and dip switches.

DIGITAL TRANSMITTERS CARATTERISTICHE ATM 05 is a digital weight transmitter for load cells with Rs232/Rs485/USB interface, fully configurable (protocol, continuous transmission / master-slave,Modbus RTU serial parameters) and can also have some optional Interfaces Ethernet and Profibus DP connection via external converters. The calibration procedure can be carried out with standard weights or in theoretical form automatically. ATM05 gives the possibility to select the acquisition the weight in a normal or fast way, has 3 diagnostic LEDs status and lines of communication and permits the...

DIGITAL TRANSMITTERS MODELLO ATM04 PROFINET is a digital amplifier for load cells with PROFINET IO interface, equipped with a 7 segment red LED display 5 digits (7mm height), a 3 mechanical buttons keyboard and an integrated communication interface RS232 and fieldbus Profinet IO. ATM04 ETHERNET is a digital amplifier for load cells with Ethernet interface and support for TCP, Modbus / TCP, UDP, IP, ICMP, ARP protocols, equipped with a 7 segment red LED display 5 digits (7mm height), a 3 mechanical buttons keyboard and an integrated RS232 communication interface. ATM04 CANopen is a digital...

WEIGHT INDICATORS CARATTERISTICHE SA02 is a front panel weight indicator with 6 digit (14mm height) LED display and 8 LED indication. The programming and calibration is carried out through the 6 keys membrane keyboard. The connections to removable terminal blocks pitch 3,81 mm allow to manage 4 setpoints and remote external commands.SA02 is equipped with RS232 and RS485 communication interfaces with Modbus RTU protocol. SE 01 is a digital weight indicator with built-in 7-segment LED display with 6 digit of 13 mm height, with 5 opto-isolated inputs and 4 relay outputs, various RS232 and...

WEIGHT INDICATORS MODELLO 3.0 INSTRUMENTS CARATTERISTICHE Digital weight indicator with LCD display 4 digit height 25 mm, with RS232 serial connection and various modes of data transmission. Interfaced with printers and display devices. This instrument can be used in ceck-in airports coupled to the repeater model RIP DI08. Conforms to EN 45501.

WEIGHT CONTROLLERS CARATTERISTICHE TBL01 Losser is a front panel indicator with backlit alphanumeric LCD display with 2 lines of 16 characters. The programming and calibration is carried out through 16 keys membrane keyboard. The connections to removable terminal blocks pitch 5,08 mm. and Sub-D connectors permit to manage the loss in weight continuous dosing (gravimetric) with PID setting of the dosage.TBL01 Losser is equipped with RS232, RS485 and Modbus RTU communication interfaces. TBL01 Belter is a front panel indicator with backlit alphanumeric LCD display with 2 lines of 16...

BIG DIGITS WEIGHT INDICATORS MODELLO The weight indicator VIS H60 is a visor with input for load cells or input 0-10V or 4-20mA, with a 6 characters/figures numerical Display, height 60 mm. The case in stainless steel and the connections are watertight. The configuration and calibration are configureted by remote control. The weight indicator VIS H60 is also provided of serial transmissions RS232, RS485 and as an option can have one external interface RF868Mhz The weight indicator VIS H100 is a visor with input for load cells or input 0-10V or 4-20mA, with a 5 characters/figures numerical...