For NYT(S)/NYT(S)-D type SLIDE TABLE, the motion accuracy is measured by placing indicators at the center of the top and side surface of the table. It is expressed in terms of the indicator deviation when the table is moved the full stroke without any RATED LIFE The life of the SLIDE TABLE is calculated using the following equations. Rated Life L: rated life (km) fn temperature coefficient fw: applied load coefficient C: basic dynamic load rating (N) P: applied load (N) SSS Please refer to page Eng-5 of NB general catalog for the coefficients. Life Time Lh: life time (hr) 8 s : stroke length (m) m : number of cycles per minute (cpm) LOAD RATING The load rating of the SLIDE TABLE differs depending on the direction of the load. Change of Load Rating Corresponding to Load Direction ■Careful Handling Dropping the SLIDE TABLE causes the rolling elements to make dents in the raceway surface. This will prevent smooth motion and affect accuracy. Please be sure to handle with care. ■Dust prevention Dust and foreign particles affect the accuracy and lifetime of the SLIDE TABLE. Please protect the table with a cover. The SLIDE TABLE is prelubricated with lithium soap based grease prior to shipment for immediate use. Please make sure to relubricate with a similar type of grease ■Adjustment/Installation Screw The SLIDE TABLE is adjusted to achieve optimum accuracy and Please do not adjust the adjustment screws or rail installation 930 Muirfield Drive, Hanover Park, Western Regional Office 2833 Chiya, Ojiya-city, Niigata-pref., 947-8503 JAPAN Eastern Regional Office Reproduction Prohibited Specifications are subject to change without notice. No.4560 First Edition: June 12,2012 NYT/NYTS type NYT-D/NYTS-D type HIGH-RIGIDITY COMPACT TYPE SLIDE TABLE With STUDROLLER System

STUDROLLER SYSTEM The STUDROLLER System provides complete prevention of roller-cage slippage. The STUDROLLER is a rivet roller, in order to prevent cage-creeping, whose rivets follow the small dimples in the raceway surface. With this unique feature to NB, the STUDROLLER system is ideal to the vertical application using non-recirculating linear bearings. part number structure NYTS: anti-corrosion table length part number basic load rating allowable static moment