Catalogs >
NB Europe >
SLIDE GUIDE

SLIDE GUIDE
4Pages

Catalog excerpts

SLIDE GUIDE SEBS-BS type SEBS-WBS type New addition to the NB miniature guide SEBS series Extra compact short block series is lined up!

Open the catalog to page 1

SEBS-BS/SEBS-BSM TYPE - Retained Ball Type - part number structure blank: resin blank: without side-seal number of blocks attached to one rail preload symbol blank: standard blank: single axis accuracy grade blank: high rail mounting hole blank: counterbore total length of rail SEBS-BS-N TYPE The symbol for the number of axes does not mean the number of rails ordered. SjPlease refer to page 3 for accuracy. N type raiKtapped hole) Rails exceeding the maximum length may be fabricated if joints are used. Please contact NB for assistance. When two blocks are used in close contact.

Open the catalog to page 2

SLIDE GUIDE SEBS-WBS TYPE - Retained Ball • Wide Type - part number structure blank: without side-seal number of blocks attached to one rail preload symbol blank: standard blank: single axis accuracy grade blank: high rail mounting hole blank: counterbore total length of rail SEBS-WBS-N TYPE ■ The symbol for the number of axes does not mean the number of rails ordered. SjPlease refer to page 3 for accuracy. N type raiKtapped hole) Rails exceeding the maximum length may be fabricated if joints are used. Please contact NB for assistance.

Open the catalog to page 3

The SEBS slide guides are available in two grades of accuracy: high grade and precision grade (P). Table 1 Accuracy unit/mm Figure 2 Motion Accuracy reference surface high grade precision grade rail length SEBS slide guides are available with a standard preload (blank), light preload (T1), and a positive-clearance (TO). Table 2 Preload Symbol and Radial Clearance Table 3 Operating Conditions and Preload iPlease refer to NB general catalog for standard block and long block. 930 Muirfield Drive, Hanover Park, Western Regional Office Eastern Regional Office 41 Orchard Street, Ramsey, TOLL...

Open the catalog to page 4