Catalogs >
NATIONAL INSTRUMENTS >
NI_cDAQ-9174

NI_cDAQ-9174
1 / 5Pages

Catalog excerpts

Choose from more than 50 hot-swappable I/O modules with integrated signal Access the 4 general-purpose 32-bit counter/timers built into the chassis through the digital module Run 7 hardware-timed operations simultaneously from analog, digital, or counter/timer channels Stream continuous waveform measurements with patented NI Signal Streaming technology Take advantage of Windows 7 OS support Measure in minutes with NI-DAQmx software and automatic code generation The NI cDAQ-9174 is a 4-slot NI CompactDAQ USB chassis designed for small, portable, mixed-measurement test systems. Combine the cDAQ-9174 with up to four NI C Series I/O modules for a custom analog input, analog output, digital I/O, and counter/timer measurement system. Modules are available for a variety of sensor measurements including thermocouples, RTDs, strain gages, load and pressure transducers, torque cells, accelerometers, flow meters, and microphones. NI CompactDAQ systems combine sensor measurements with voltage, current, and digital signals to create custom, mixed-measurement systems with a single, simple USB cable back to the The cDAQ-9174 has four 32-bit general-purpose counter/timers built in. You can access these counters through an installed, hardware-timed digital NI C Series module such as the NI 9401 or NI 9402 for applications that involve quadrature encoders, PWM, event counting, pulse train generation, and period or frequency measurement. The cDAQ-9174 chassis is shipped with the following: - AC/DC converter that plugs directly into the chassis - USB cable with a thumbscrew lock for strain relief Power cord sold separately. For conditions where EMI could be an issue, you can use the 7.0 mm EMI suppression ferrites to suppress EMI for BNC cabling to the NI-DAQmx driver software is shipped with every chassis and includes the following: - LabVIEWSignalExpress LE for simple data-logging applications - API for LabVIEW, ANSI C/C++, C#, and Visual Basic .NET

Open the catalog to page 1

- DAQ Assistant code generation for NI LabVIEW, LabWindows™/CVI, and Measurement Studio - Example programs for all supported languages - NI Measurement & Automation Explorer (MAX) for system configuration and test The mark LabWindows is used under a license from Microsoft Corporation. Windows is a registered trademark of Microsoft Corporation in the United States and other countries. Specifications Documents • Data Sheet Specifications Summary Product Name Form Factor Product Type Part Number Operating System/Target Operating Relative Humidity Total Available Power Input Voltage Range...

Open the catalog to page 2

Random Operating Frequency Range 5 Hz , 500 Hz Physical Specifications Minimum Operating Temperature -20 °C Maximum Operating Temperature 55 °C Part Number Description 781157-01 cDAQ-9174, CompactDAQ chassis (4 slot USB) 781156-01 cDAQ-9178, CompactDAQ chassis (8 slot USB) Common Starter Accessories Power Cord, AC, U.S., 120 VAC, 2.3 meters Power Cord, 240V, 10A, North American NI 9977 C Series Filler Module for Empty Slot USB/PCMCIA Cable Strain Relief for Laptop 780315-01 Rugged Carrying Case for Portable Instrumentation 780702-01 2-Position Screw Terminal Kit for Power Supply Connection,...

Open the catalog to page 3

Extended Warranties National Instruments designs and manufactures all products to minimize failures, however unexpected failures can still occur. Extended warranties provide a fixed economical price at the time of system purchase, covering any repair costs for up to three years. In addition, they offer the following benefits: • Significant cost savings compared to individual repair incidents • Fault location, diagnostics, and repair by NI any time the system product fails • All parts and labor costs covered as well as any adjustments needed to restore the hardware to manufacturing...

Open the catalog to page 4