32 Ch, ±10 V, 600 V Isolation Input for USB/Ethernet/Wi-Fi Included measurement module and 1 -slot NI CompactDAQ chassis USB, Ethernet, and 802.11 Wi-Fi connectivity 16 differential analog inputs ±200 mV, ±1 V, ±5 V, and ±10 V programmable input ranges 16-bit resolution, 250 kS/s aggregate sampling rate The NI 9206 Measurement System measures 32 voltage channels at 250 kS/s with 16-bit resolution, sending data to a host PC over Measurement Bundle Overview The hardware for an NI CompactDAQ single measurement bundle consists of a USB, Ethernet, or 802.11 W-Fi chassis and one of the over 50 NI C Series measurement-specific modules. These small rugged bundles are ideal for portable or distributed The chassis controls the timing for the module and handles communication with the PC over the USB, Ethernet, or 802.11 W-Fi bus. Additionally, all NI CompactDAQ chassis include four counter/timers that you can access through a digital I/O module like the NI 9401. The NI 9206, for use with NI CompactDAQ and CompactRIO chassis, features 16 differential analog inputs, 16-bit resolution, and a maximum sampling rate of 250 kS/s. Each NI 9206 channel has programmable input ranges of ±200 mV, ±1 V, ±5 V, and ±10 V. The NI 9206 provides up to 600 VDC (400 VDC in Europe) bank isolation from earth ground, which makes the module ideal for accurately monitoring large fuel cell and battery stacks. While each bank of measured cells can be up to 600 V from earth ground, each channel of the NI 9206 must remain within 10 V of the module COM. By referencing the module COM to the middle of the NI 9206 bank, you can measure 16 consecutive cells. The NI 9206 comes with the NI 9941 connector accessory, which includes a spring terminal connector and backshell to provide strain relief for taking high-voltage measurements. Note: The NI 9206 should not be connected to MAINs CAT II, III, or IV circuits. It is a UL-recognized component that must be installed in a suitably UL-rated enclosure such as the NI 9917 or NI 9918 industrial enclosures. See the product manual for proper installation and restrictions for safe use of the NI 9206 and explanation of measurement categories (CAT).

Specifications Documents Specifications Summary Product Name Product Family Form Factor Part Number Operating System/Target Measurement Type RoHS Compliant Analog Input Single-Ended Channels Differential Channels Sample Rate Maximum Voltage Range Maximum Voltage Range Accuracy Minimum Voltage Range Minimum Voltage Range Accuracy Simultaneous Sampling Analog Output Bidirectional Channels Input-Only Channels Output-Only Channels Wireless , CompactDAQ , Ethernet, USB Real-Time , Windows

Physical Specifications Minimum Operating Temperature Maximum Operating Temperature Minimum Storage Temperature Maximum Storage Temperature Triggering Analog Triggers cDAQ Chassis No Bundle Contents Estimated Shipping Days : 8 -10 Price : $ 1,585 ^ Choose a communication method between your PC and module. NI cDAQ-9171, 1 -Slot USB Chassis 781425-01 (Included in price) NI cDAQ-9181, 1 -Slot Ethernet Chassis 781496-01 Add $ 110 NI cDAQ-9191, 1 -Slot WI-FI Chassis (U.S.) 781497-01 Add $ 220 NI cDAQ-9191, 1 -Slot WI-FI Chassis (International) 781497-02 *f Analog Input Module NI 9206 16-Channel +/-10...

LabVIEW Full Development System, Windows, English, Include 1 LabVIEW Full Development System, Windows, Japanese, Include LabVIEW Full Development System, Windows, French, Include 1 LabVIEW Full Development System, Windows, Chinese, Include 1 Estimated Shipping Days : 8 -10 Price : $ 1,585 You have selected Tunisia as the country where you will use the product(s) (change). * You have selected Tunisia as the country where you will use the product(s). Pricing may have changed since you printed this document on 07/10/2012. Please visit ni.com to see current pricing. Place Order or Obtain Quote 1...