Measurement_System
4Pages

{{requestButtons}}

Catalog excerpts

Measurement_System - 1

32 Ch, 250 kS/s Voltage Input for USB, Ethernet, or Wi-Fi USB, Ethernet, and 802.11 Wi-Fi connectivity 32 single-ended or 16 differential analog inputs 16-bit resolution; 250 kS/s aggregate sampling rate ±200 mV, ±1 V, ±5 V, and ±10 V programmable input ranges Spring terminal or D-SUB connectivity The NI 9205 Measurement System measures 32 voltage channels at 250 kS/s with 16-bit resolution, sending data to a host PC over Measurement Bundle Overview The hardware for an NI CompactDAQ single measurement bundle consists of a USB, Ethernet, or 802.11 W-Fi chassis and one of the over 50 measurement-specific modules. These small rugged bundles are ideal for portable or distributed measurements. The chassis controls the timing for the module and handles communication with the PC over the USB, Ethernet, or 802.11 W-Fi bus. Additionally, all NI CompactDAQ chassis include four counter/timers that you can access through a digital I/O module like the NI 9401. The NI 9205 C Series module works with NI CompactDAQ and CompactRIO chassis. It features 32 single-ended or 16 differential analog inputs, 16-bit resolution, and a maximum sampling rate of 250 kS/s. Each channel has programmable input ranges of ±200 mV, ±1 V, ±5 V, and ±10 V. To protect against signal transients, the NI 9205 includes up to 60 V of overvoltage protection between input channels and common (COM). In addition, the module features a channel-to-earth ground double isolation barrier for safety, noise immunity, and high-common-mode voltage range. It is rated for 1,000 Vrms transient overvoltage protection. You can choose from two connector options for the NI 9205: a 36-position spring terminal connector for direct connectivity or a 37-position D-SUB connector. To add strain relief and high-voltage protection to the 36-position terminal of the NI 9205, National Instruments recommends the NI 9940 strain relief connector accessory. The NI 9205 with D-SUB option has an industry-standard 37-position D-SUB connector that provides a low-cost cabling option to a wide variety of accessories from NI or other vendors. Several vendors that provide custom D-SUB cable fabrication services also offer cables with a pinout that matches your exact application needs. The NI 9933 (or other 37-pin D-SUB connector) is required for use with the NI 9205 with D-SUB. The NI 9933 includes a screw terminal connector with strain relief as well as a D-SUB solder cup backshell for creating custom cable assemblies.

Open the catalog to page 1
Measurement_System - 2

Specifications Documents Specifications Summary Product Name Product Family Form Factor Part Number Operating System/Target Measurement Type RoHS Compliant Analog Input Single-Ended Channels Differential Channels Sample Rate Maximum Voltage Range Maximum Voltage Range Accuracy Minimum Voltage Range Minimum Voltage Range Accuracy Simultaneous Sampling Analog Output Bidirectional Channels Input-Only Channels Output-Only Channels Ethernet, USB , Wireless , CompactDAQ Windows , Real-Time

Open the catalog to page 2
Measurement_System - 3

Physical Specifications Minimum Operating Temperature Maximum Operating Temperature Minimum Storage Temperature Maximum Storage Temperature Triggers cDAQ Chassis 36-position spring terminal, 37-pin D-Sub Bundle Contents Estimated Shipping Days : 8 -10 Price : $ 1,190 *f Choose a communication method between your PC and module. </ Analog Input Module NI cDAQ-9171, 1 -Slot USB Chassis 781425-01 (Included in price) NI cDAQ-9181, 1 -Slot Ethernet Chassis 781496-01 Add $ 110 NI cDAQ-9191, 1 -Slot WI-FI Chassis (U.S.) 781497-01 Add $ 220 NI cDAQ-9191, 1 -Slot WI-FI Chassis (International)...

Open the catalog to page 3
Measurement_System - 4

Power Cord, AC, U.S., 120 VAC, 2.3 meters 763000-01 Add $ 10 Power Cord, 240V, 10A, North American 763068-01 Add $ 20 LabVIEW Full Development System, Windows, English, Include 1 LabVIEW Full Development System, Windows, Japanese, Include LabVIEW Full Development System, Windows, French, Include 1 LabVIEW Full Development System, Windows, Chinese, Include 1 Estimated Shipping Days : 8 -10 Price : $ 1,190 You have selected Tunisia as the country where you will use the product(s) (change). * You have selected Tunisia as the country where you will use the product(s). Pricing may have changed...

Open the catalog to page 4

All NATIONAL INSTRUMENTS catalogs and technical brochures

  1. NI 9381

    10 Pages

  2. NI 9402

    9 Pages

  3. BNC-2121

    3 Pages

  4. Counter/Timer

    10 Pages

  5. NI PXIe-6612

    12 Pages

  6. ds-392

    7 Pages

  7. ETC_196

    9 Pages

  8. ds-293

    13 Pages

  9. ds-353

    14 Pages

  10. ds-361

    5 Pages

  11. NI WSN-3202

    13 Pages

  12. cat_ni31xx

    5 Pages

  13. GPIB-USB-HS

    7 Pages

  14. Digital I/O,

    9 Pages

  15. NI PCIe-6321

    15 Pages

  16. NI USB-6509

    8 Pages

  17. NI_PCI-6713.

    5 Pages

  18. NI_PCIe-6363

    5 Pages

  19. NI_EVS-1464

    9 Pages

  20. ds-153

    18 Pages

  21. ds-37

    14 Pages

  22. NI4065

    6 Pages

  23. 4daqsc253

    17 Pages

  24. NI_PCI-5122

    5 Pages

  25. NI_FPT-1015

    3 Pages

  26. NI_PXI-2501

    5 Pages

  27. cat_FET

    3 Pages

  28. 4daqsc253-265

    17 Pages

  29. usb-datasheet

    14 Pages

  30. NI_9478

    4 Pages

  31. NI_cDAQ-9171

    3 Pages

  32. NI_cDAQ-9174

    5 Pages

  33. NI_cDAQ-9178

    5 Pages

  34. NI_cDAQ-9181

    4 Pages

  35. NI_cDAQ-9188

    5 Pages

  36. NI_cDAQ-9139

    4 Pages

Archived catalogs