Catalogs >
NATIONAL INSTRUMENTS >
043918301101dlr

043918301101dlr
1 / 7Pages

Catalog excerpts

S Series Multifunction DAQ – up to 16-Bit, up to 3 MS/s per Channel, up to 8 Analog Inputs NI 6123, NI 6122, NI 6133, NI 6132 • 4 or 8 simultaneous-sampling differential analog inputs • 14- or 16-bit resolution • 3 MS/s1 or 500 kS/s per channel maximum sampling rate • 4 analog input ranges • Deep onboard memory – 16 or 32 MS • 8 digital I/O lines (5 V/TTL/CMOS); two 24-bit counter/timers • Digital and analog triggering • Measurement services that simplify configuration and measurements Operating Systems • Windows 2000/NT/XP Recommended NI Software • LabVIEW 7.x or higher • LabWindows/CVI 7.x or higher • Measurement Studio 7.x or higher • Digital Waveform Editor • SignalExpress 1.x or higher Other Compatible Software • VI Logger 2.x or higher • Visual Studio .NET • Visual Basic, C/C++, and C# Measurement Services Software (included) • NI-DAQmx driver • Measurement & Automation Explorer configuration utility • VI Logger Lite data-logging software Calibration Certificate Available Family NI 6123 NI 6122 NI 6133 NI 6132 12.5 Bus PCI, PXI PCI, PXI PCI, PXI PCI, PXI Analog Inputs 8 4 8 4 Input Resolution (bits) 16 16 14 14 Sampling Rate 500 kS/s per channel 500 kS/s per channel 3 MS/s per channel1 3 MS/s per channel1 Input Ranges 4 4 4 4 Digital I/O 8 @ 10 MHz 8 @ 10 MHz 8 @ 10 MHz 8 @ 10 MHz Counter/Timers 2, 24-bit 2, 24-bit 2, 24-bit 2, 24-bit Trigger Analog, digital Analog, digital Analog, digital Analog, digital MS/s with NI-DAQmx; 3 MS/s with additional download. Special conditions apply. Table 1. Channel, Speed, and Resolution Specifications Overview and Applications National Instruments 612x and 613x devices combine the latest in PC technologies to deliver simultaneous sampling for high-channelcount, high-speed applications. Use these modules in a variety of applications, including: • IF digitization • Transient recording • ISDN, ADSL, and POTS manufacturing test in the telecom industry • Ultrasound and sonar testing • High-energy physics constant, regardless of the number of active channels. S Series aggregate data throughput increases linearly with the number of active channels. Better Dynamic Specifications – The analog input path on S Series devices is tuned for both accurate DC and dynamic measurements, compared to traditional multiplexed data acquisition devices that suffer from settling time and distortion error created by switching the input channel. Traditional multiplexed data acquisition devices are ideal for DC measurements, but are not the best solution for dynamic measurements. Features These devices fall under the NI S Series product family. The “S” stands for simultaneous sampling, as this is the most apparent benefit of the dedicated analog-to-digital (A/D) converter per channel architecture. However, the architecture has other less obvious but very important advantages. More Data Throughput – The dedicated A/D converter per channel architecture provides a much higher aggregate sampling rate compared to traditional multiplexed data acquisition devices. Traditional multiplexed data acquisition devices share one A/D converter among multiple channels, keeping the aggregate data throughput Many Input Ranges – You can configure each analog input channel to use one of several voltage ranges. Make the most of your input resolution by selecting among the four voltage ranges offered by the NI 612x and 613x devices. Large Onboard Memory – NI 6123 and NI 6133 devices feature a 16 or 32 MS onboard memory while the NI 6122 and NI 6132 devices feature a 16 MS memory. With deep onboard memory, capture highbandwidth signals over long periods of time, regardless of bus limitations.

Open the catalog to page 1

S Series Multifunction DAQ – up to 16-Bit, up to 3 MS/s per Channel, up to 8 Analog Inputs Professional Analysis and Presentation Toolkits There are several analysis and presentation add-on toolkits available from National Instruments that help make you more productive when developing custom applications with your S Series devices. Turn your S Series device into a transient recorder, spectrum analyzer, or one of several other instruments with these toolkits. NI LabVIEW Sound and Vibration Toolkit This toolkit includes a full set of frequency-domain analysis and presentation tools required...

Open the catalog to page 2

S Series Multifunction DAQ – up to 16-Bit, up to 3 MS/s per Channel, up to 8 Analog Inputs CAL Mux Address/Data DustMITE PGIA AI 0 16-Bit ADC Control AI 0 Channel Control 0 PGIA AI 1 16-Bit ADC Data (32) Config EEPROM AI 1 Address (32) Channel Control 1 SCARAB AI 2 Cal EEPROM Channel Control 2 I/O Connector PGIA AI 3 16-Bit ADC FPGA Channel Control 3 PGIA AI 4 16-Bit ADC AI Control AI 3 AI 4 STCA Channel Control 4 AI 5 16-Bit ADC DMA/IRQ AI 5 CPLD Trigger Analog Input Timing/ Control DMA/IRQ Counter/ Timing I/O DAQSTC Bus Interface Digital I/O PGIA Analog Output Timing/ Control Channel...

Open the catalog to page 4

NI Services and Support NI has the services and support to meet your needs around the globe and through the application life cycle – from planning and development through deployment and ongoing maintenance. We offer services and service levels to meet customer requirements in research, design, validation, and manufacturing. Visit ni.com/services. Local Sales and Technical Support SERVICE NEEDS In offices worldwide, our staff is local to the country, giving you access to engineers who speak your language. NI delivers industryleading technical support through online knowledge bases, our...

Open the catalog to page 7