It guarantees: ■ Energy saving thanks to photovoltaic energy supply and variable-speed operation. ■ Quick return on investment. ■ Lengthening of system life and greater system reliability. ■ Quick and simplified installation thanks to the electronics integrated into the motor and smartphone control. ■ Extremely low noise operation. ■ Installation in humid and dusty environments thanks to IP55 (NEMA 4) protection rating. hydraulic part with rapid extraction inlet pre-filter. Carbon-ceramic mechanical seal. Pump body, impeller and diffuser in reinforced technopolymer. Transparent polycarbonate filter...

SUND is powered by solar panels or, if necessary, by mains supply. In this way, the pump’s operation is guaranteed at any time of day. on multiple logics that the user can select: It is also possible to meet demand peaks through mains power in order to avoid the over-dimensioning of the photovoltaic system. radiation level When installed, the HMA accessory automatically manages the switch from one source of energy to the other based remote control via digital input. time of day achievement of the daily flow requirement Integrated inverter attached to the motor, exclusively in aluminium, and with...

MPPT: always the maximum power available When solar irradiation decreases (due to clouds or the different times of day), the pump reduces frequency and therefore the flow, but it continues to provide water until the irradiation falls below a minimum level necessary to ensure operation. Based on the varying conditions of solar irradiation and temperature, MPPT (Maximum Power Point Tracking) maximises the electrical power drawn from the panels and therefore the amount of water pumped. The greater the solar irradiation the faster the pump’s rotation speed, and consequently water flow increases.

Built-in protections against: ■ Overvoltage and undervoltage. ■ Overcurrent and no load. ■ Dry running. ■ Overtemperature. EMC compatibility for residential environment: ■ Integrated PFC (P.F. 1) to meet EN61000-3-2 ■ Integrated input filter for Category C1 (EN61800-3), Class B (EN55011)

Unmatched user experience Thanks to Nastec NOW App it’s possible to communicate with all Nastec devices Bluetooth® SMART in order to: UCHillUE riHUU ■ Monitor multiple operating parameters simultaneously on the wide, high definition, coloured screen of your smartphone or tablet. H Get statistics of energy consumption and check alarms history. M Make programs, save them in the archive, copy them to other devices and share them among multiple users. I Perform reports with the possibility to insert notes, images and email them or keep them into the digital archive. H Remotely control, via wi-fi...

General specifications ■ Rated frequency: 48 - 62 Hz ■ Max liquid temperature: 40°C (104°F) ■ Max ambient temperature: 50°C (122°F) ■ Max altitude at rated current: 1000 m ■ Protection degree: IP55 (NEMA 4) ■ Max current pressure: 3 bar ■ Max aspiration height: 2.5 m ■ Motor insulation: F ■ Settable digital outputs N.O. or N.C.: 4. 0 - 10 VDC ■ 4 digital inputs, configurable N.O. or N.C. for motor run/stop. ■ RS485 MODBUS RTU, Bluetooth® SMART (4.0)

Nastec srl Via della Tecnica 8 36021 Barbarano Mossano Vicenza - Italy tel +39 0444 886289 fax+39 0444 776099 [email protected] GR000920 09.2018 Nastec reserves the right to modify the technical features contained in this document without notice.