MIDA Solar
8Pages

MIDA Solar Next generation of solar pumping inverter

Ideal for any kind of solar pumping application It ensures: ■ New solar pumping systems creation. ■ Conversion of existing systems into solar pumping systems. ■ Control of both three-phase and single-phase pumps. ■ Soft start and soft stop. ■ Installation on humid and dusty environments made possible by IP66 (NEMA 4X) protection degree. ■ Easy and fast commissioning thanks to initial configuration wizard. ■ High thermal and mechanical performance thanks to aluminium case and independent ventilation. Based on the varying conditions of solar irradiation and temperature, MPPT (Maximum Power...

MIDA Solar can be used with any type of traditional AC pump, thereby offering maximum flexibility in several areas of application. When using surface pumps, MIDA Solar can be used for an irrigation system drawing water from a nearby water supply, or powering a pool pump at no cost. When using submersible pumps, MIDA Solar can fill tanks for watering livestock or simply irrigate lawns or crops. MIDA Solar, in MP (MultiPower) version, can be powered in DC by solar panels or in AC by network or generator to ensure the functioning of the pump at any hour of the day. This controls the peaks of...

Automatic voltage adjustment MIDA Solar is equipped with an internal “boost” circuit able to increase the voltage coming from solar panels. In this way the sizing of the photovoltaic system is independent of the pump’s nominal voltage and only proportional to its power. This implies a significant saving in the number of the solar panels, compared to systems without boost. Example: Pump power: 0,75 kW Motor’s nominal voltage: 3x230 VAC Recommended photovoltaic system power: 1250 W Without boost In order to allow the pump to reach the maximum frequency (maximum speed) it is necessary to...

Built-in protections against: ■ Overvoltage and undervoltage. ■ Overcurrent and no load. ■ Dry running. ■ Overtemperature. Advanced motor controls: ■ Control of single phase motors. ■ Next generation control of asynchronous motors. ■ Sensorless control of permanent magnet synchronous motors. ■ Integrated input filter for Category C1 (EN61800-3), Class B (EN55011)

Unmatched user experience Thanks to Nastec NOW App it’s possible to communicate with all Nastec devices Bluetooth® SMART in order to: MKHMO' MUQI-O ■ Monitor multiple operating parameters simultaneously on the wide, high definition, coloured screen of your smartphone or tablet. M Get statistics of energy consumption and check alarms history. M Make programs, save them in the archive, copy them to other devices and share them among multiple users. I Perform reports with the possibility to insert notes, images and email them or keep them into the digital archive. H Remotely control, via wi-fi...

* AC power available only for MIDA Solar MP models. ** Typical motor power. It is recommended to refer to rated motor current when selecting the MIDA Solar model. General specifications ■ Rated frequency: 50 - 60 Hz (+/- 2%) ■ Ambient temperature: -10 - 50°C (14 - 122°F) ■ Max. altitude at rated current: 1000 m ■ Protection degree: IP66 (NEMA 4X) ■ Settable digital outputs N.O. or N.C.: 2. Alarm signal ■ Analog inputs (10 or 15 VDC): 1. 4-20 mA 2. 4-20 mA 4. 0 - 10 VDC ■ 4 digital inputs, configurable N.O. or N.C. for motor run/stop ■ RS485 MODBUS RTU, Bluetooth® SMART* (4.0)

Nastec srl Via della Tecnica 8 36048 Barbarano Mossano Vicenza - Italy tel +39 0444 886289 fax+39 0444 776099 info@nastec.eu GR001650_rev2 06.2019 Nastec reserves the right to modify the technical features contained in this document without notice.