■ New solar pumping systems creation. ■ Conversion of existing systems into solar pumping systems. ■ Control of both three-phase and single-phase pumps. ■ Soft start and soft stop. ■ Installation on humid and dusty environments made possible by IP66 (NEMA 4X) protection degree. ■ Easy and fast commissioning thanks to initial configuration wizard. ■ High thermal and mechanical performance thanks to aluminium case and independent ventilation. When using surface pumps, MIDA Solar can be used for an irrigation system drawing water from a nearby water supply, or powering a pool pump at no cost. When...

MIDA Solar, in MP (MultiPower) version, can be powered in DC by solar panels or in AC by network or generator to ensure the functioning of the pump at any hour of the day. This controls the peaks of water demand using AC input to avoid the oversizing of the photovoltaic system. HMA accessory, used in combination with MIDA Solar MP models, manages independently the exchange from a source of energy to another on the basis of several options that can be select by the user: irradiance level hour of the day achievement of the requested daily range remote control trough digital command. Pump Inverter...

AUTOMATIC VOLTAGE ADJUSTMENT MPPT: ALWAYS THE MAXIMUM POWER AVAILABLE Based on the varying conditions of solar irradiation and temperature, MPPT (Maximum Power Point Tracking) maximises the electrical power drawn from the panels and therefore the amount of water pumped. The greater the solar irradiation the faster the pump’s rotation speed, and consequently water flow increases. When solar irradiation decreases (due to clouds or the different times of day), the pump reduces frequency and therefore the flow, but it continues to provide water until the irradiation falls below a minimum level necessary...

BUILT-IN PROTECTIONS AGAINST: Overvoltage and undervoltage. Overcurrent and no load. Dry running. Overtemperature. EMC COMPATIBILITY FOR RESIDENTIAL ENVIRONMENT: Integrated PFC (P.F. 1) to meet EN61000-3-2 Integrated input filter for Category C1 (EN61800-3), Class B (EN55011) per MIDA 203, 205, 207 DISPLAY OLED Graphic OLED display with extended range of operating temperature and wide viewing angle. Digital rotation of text based on the installation position. Led indication for stand-by, run and alarm conditions. Easy reading of main parameters and alarms. Complete programming through smartphone....

In addition to the advanced control of three-phase asynchronous and synchronous motors with permanent magnets, in models with single-phase input, control for single-phase motors is available: In the control of single-phase 3-wire motors, the use of the control box with capacitors and starting relays is no longer necessary as the inverter electronically performs its function. This results in a significant advantage in terms of operational regularity and long-term reliability.

UNMATCHED USER EXPERIENCE Thanks to the Nastec NOW app it is possible to communicate with all Nastec SMART Bluetooth® devices in order to: ■ Monitor multiple operating parameters simultaneously on the wide, high-definition colour screen of your smartphone or tablet. ■ Develop programs, save them in the archive, copy them to other devices and share them among multiple users. ■ Get energy consumption statistics and check the alarm log. ■ Remotely control a Nastec device via Wi-Fi or GSM by tethering to a nearby smartphone. ■ Create reports with the possibility of adding notes and images, and email...

PREDICTIVE ANALYSIS AND REMOTE CONTROL Through predictive analysis conducted by the device during operation, it is possible to intervene before a problem occurs, minimizing intervention and repair costs. If the device is connected to the internet, warning or alarm notifications can be sent via email to the relevant users. To do so, a quick configuration is required through the remo.nastec.eu portal. remo.nastec.eu REMO, the revolutionary Nastec system for remote controlling devices. To implement the REMO control system you will need to: Install an Android or iOS smartphone nearby Nastec device...

* AC power available only for MIDA Solar MP models. ** Typical power. Refer to the motor current in the selection of the appropriate MIDA Solar model. ■ EMC Compliance: EN61800-3 C2 (C1 for MIDA Solar 203, 205, 207) ■ Energy efficiency class (EN61800-9-2): IE2 ■ Relative humidity of the working environment: 5 - 95% non-condensing ■ Working ambient temperature: from -10 °C (14 °F) to 60 °C (140 °F) ■ Maximum working ambient temperature at full load: 50°C (122 °F) ■ Maximum altitude at rated current: 1000 m ■ Protection degree: IP66 (NEMA 4X) ■ Settable digital outputs N.O. or N.C: ■ 4 digital...

We were born in 2007 with over 30 years of previous experience in water pumps. We develop products dedicated to specific applications. We don’t claim to do everything, but we strive to do the best at what we do. We support our customers always and by every possible means. We are global in sales but local in assistance. Our mission? To make pumping systems intelligent, efficient, and connected. Nastec srl Via della Tecnica 8 36048 Barbarano Mossano Vicenza - Italy tel +39 0444 886289 fax +39 0444 776099 [email protected] We update our products while maintaining compatibility with the past. We love...