NASH VectraPaks

NASH VectraPaks - Standardized Solutions Vectra Feature External mechanical seals Flexibility and ease of maintenance Direct drive speeds for 50/60 Hz motors Extended pressure ratings Ability to handle tough applications where backpressure is required Conical design Better ability to handle water/particulate slugs and residual gases Long term reliability Variable port design High efficiency Increased performance at high vacuum levels Factory performance tested Trouble free start-up and operation Backed by 2 year warranty and over 100 years of vacuum and compressed gas experience

NASH VectraPaks - Direct Drive Dimensions OnceThrough High vacuum flow controls Inlet check valve Inlet isolation valve External lobe purge Mechanical seals (standard or stainless steel) Relief valve Vacuum gauge Flow switch Partial recirculated seal Seal line isolation valve Spray nozzle Variable speed drive Once-Through Systems Weight lb • kg Motor voltages: • 230/460 (standard) • 575 Motor efficiency: • EISA (standard) Motor enclosures: • ODP • TEFC (standard) • TEFC-SD • Explosion proof Recirculated Systems Model Discharge Inlet Water Trap Silencer Solenoid Valve with Manual Operator S Flow...

NASH VectraPaks - V-Belt Drive Dimensions Discharge Separator Solenoid Valve with Manual Operator S Drain Vectra Series Pump Cooling Water In Make-Up And Initial Fill Flow Control Strainer Valve Orifice Union Applies to Both Direct and V-Belt Drive Systems Once-Through Systems Model L W H Inlet Discharge Weight in • mm in • mm in • mm in • mm in • mm lb • kg Recirculated Systems Model L W H Inlet Discharge Weight in • mm in • mm in • mm in • mm in • mm lb • kg

NASH VectraPaks - Standardized Solutions Pre-engineered Quick delivery Plug & Play Available in Iron and Stainless Steel Simplify your installation with a packaged system from Gardner Denver Nash. Pre-engineered NASH VectraPaks are provided with all of the necessary components assembled and piped. You receive a complete system that is ready to install. Mounted pumps, once-through and fully recirculated systems are available in various sizes, and in iron or all stainless steel construction. Vacuum levels to 29” HgV (to 31 mbar abs). Need higher vacuum? We also offer Oil Sealed packages. Contact...

Other NASH Products TC/TCM Integral 2 stage liquid ring pumps with improved performance at vacuum levels down to 0.8" HgA (27 mbar) Designed to handle large amounts of liquid carryover without difficulty Capacity of 100 to 2,240 CFM with vacuum to 0.8” HgA Capacity of 170 to 3,740 m3 /h with vacuum to 27 mbar abs Sizes range from one-inch (25mm) to 78-inch (2 meters) inlets Capacities range from 20 to 20,000 CFM Capacities range from 34 to 34,000 m3/h Multi-stage system pressures as low as 0.001 mm HgA Large liquid ring vacuum pumps with superior corrosion resistance Top discharge capability...