THM 1176

THM 1176

THM 1176

Product catalog summary
Overview: The document describes the 3-Axis Hall Magnetometer, a device designed to measure static magnetic fields ranging from millitesla (mT) up to 3 Tesla. It features a compact design suitable for portable use or direct PC connection, and is available in both PDA and PC versions.
Specifications: The magnetometer is available in two versions: the THM1176-MF with a 3 Tesla probe and the THM1176-LF with a Low Field probe (8 mT). It offers a frequency range from DC to 1 kHz and includes features such as FFT spectral analysis, USB interface, and PC control software compatible with Windows and Mac OS X.
Applications: The device is suitable for measuring magnetic fields in various applications, including medical equipment like MRI, metal production, and railway systems. It helps in identifying danger zones around MRI scanners to prevent injuries.
Features: Key features include simultaneous measurement of three axes, a bandwidth of DC to 1 kHz, graphical results display, and data recording capabilities. The device supports both numerical and graphical data display, with options for range and units selection.
Technical Specifications: The magnetometer offers automatic or manual ranging with resolutions of 100 µT for the 3 Tesla probe and 2 µT for the Low Field probe. It has an uncertainty of ±1% of reading and supports various units of measurement. The device is USB bus-powered and supports a sample rate of up to 6.8 kSa/s.
PDA Specifications: The PDA version includes an industrial-quality PDA with a touch screen, pre-loaded software, and connectivity options such as USB, Bluetooth, and Wi-Fi. It has a battery life of at least 6 hours and supports various mobile applications.
Operating Conditions: The probe operates within a temperature range of 0°C to +40°C and can handle magnetic fields up to 3 Tesla. The PDA operates up to 50°C and can withstand forces up to 50 N.
General Specifications: The device comes with a 2-year warranty, with the PDA limited to 1 year and batteries to 3 months. It is CE certified and firmware upgradeable by the user.
Ordering Information: The document provides part numbers for different versions of the magnetometer, detailing included accessories such as probes, software, and calibration certificates.
See more

Catalog excerpts

THM 1176-1

3-AXIS HALL MAGNETOMETER A Complementary Product From Measuring static magnetic fields ranging from mT up to 3 Tesla Non-directional measurement using an isotropic 3-axis HALL probe 3 Tesla probe and Low Field probe (8 mT) versions Small sized field sensitive point for accurate measurements in high gradient fields Frequency range from DC to 1 kHz FFT Spectral analysis mode USB probe interface, bus–powered PC control software included for Microsoft Windows and Mac OS X PDA versions only Easy operation by PDA touch screen

 Open the catalog to page 1
THM 1176-2

DESCRIPTION The Three-axis Hall Magnetometer is used to measure the magnetic field (flux density). Its unique, extraordinarily compact design allows it to be used as a portable instrument or directly connected to a PC. APPLICATIONS The probe is designed for measuring magnetic fields with frequencies from DC to 1 kHz. Measurements on medical equipment (magnetic resonance imaging, MRI), metal production equipment and railway systems are typical applications. To avoid injuries to patients or personnel with implants, hospitals usually mark the danger zone around an MRI scanner, where the field exceeds...

 Open the catalog to page 2
THM 1176-3

SPECIFICATIONS THM1176-MF 3 Tesla Probe MEASUREMENTS Measurement ranges: (automatic or manual ranging) Resolution: - No averaging Uncertainty: T, mT, µT, nT, kG, G, mG, MHzp (NMR frequency of proton), ADC User offset correction: To be performed before each series of measurements, in Zero Gauss Chamber supplied - Numerical and graphical display of data (including total field) - Range and units selection - Hold and Maximum - Record to file and recall file Record file format: Data output: - Bx, By, Bz (ASCII or binary, single point or array, calibrated or not) - Temperature (uncalibrated) - Time...

 Open the catalog to page 3
THM 1176-4

PDA SPECIFICATIONS (PDA versions only) PDA type: Industrial-quality PDA with USB host interface and Windows Mobile® 230 g with 2600 mAh battery, stylus and USB adaptor cable Input Device: - Power jack - 2.5mm audio headset jack - 26 pin connector for ActiveSync, USB 1.1 host and USB 2.0 client - CompactFlash and SDIO expansion slots Built-in microphone and speaker 128 MB SDRAM, 256 MB NAND Flash IEEE 802.11 b/g; internal antenna Battery life: Record file format: Pre-loaded software: - THM1176 Acquisition software - Word Mobile, Excel Mobile, PowerPoint Mobile - Outlook Mobile, IE Mobile, MSN...

 Open the catalog to page 4
THM 1176-5

PROBE HEAD – MECHANICAL DETAILS Size: - Instrument electronics - Probe with cap Probe with cap (both versions) PDA versions come with transport case PC versions come with cardboard box

 Open the catalog to page 5
THM 1176-6

ORDERING INFORMATION PDA Versions THM1176-LF-PDA, Magnetometer, Low Field, PDA included Includes: - 3-axis Low Field Hall probe with 3 meter cable Industrial-quality PDA (pre-installed software, ready to use) Socket SoMo 650 Li-Ion Battery, Extended 2600mAh AC adaptor/charger (100-240 VAC 50/60 Hz) with wall socket adaptor plugs for Europe, UK, USA, Australia USB-Host adaptor cable to connect PDA to THM1176 USB-Device adaptor cable to connect PDA to PC CD with acquisition software for PC (Windows XP/Vista/Windows 7, Mac OS X), PDA (Windows Mobile), LabVIEW source code for all PC and PDA software...

 Open the catalog to page 6
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.