12-06 - AMS 8060 1/5 Subject to change without notice Frequency selective monitoring and logging of environmental electromagnetic fields Up to 20 fully programmable frequency bands Real built-in spectrum analyser for better performance and flexibility Built-in tri-axial antenna Broadband evaluation mode Automatic & manual data download to PC base station by internal GSM modem Dedicated acquisition software for data collection and analysis Passes warnings and alarms on to PC and mobile phones Standard GSM communication via modem and SMS Area Monitor AMS 8060 with Solar Panel www.narda-sts.com FREQUENCY SELECTIVE EMF AREA MONITOR AMS-8060

12-06 - AMS 8060 2/5 Subject to change without notice The wide range of electrical and electronic equipment present everywhere and the large number of wireless applications – from mobile communications to radio frequency identification (RFID), from electronic article surveillance (EAS) to broadcast and data transfer - represent the base for the presence of “uncontrolled” electromagnetic environments The effects of non-ionising radiation (i.e., e.m. fields) are a very important and sensitive issue at an international level. Several international agencies and standardisation bodies are regulating...

12-06 - AMS 8060 3/5 Subject to change without notice THE AMS-8060 SW-02 SOFTWARE A powerful, easy-to-use function programming and data analysis tool The Selective Area Monitoring programming software is a powerful tool specifically designed to deploy all the potentialities of the AMS-8060 hardware. All parameters of the station can be controlled, monitored, modified and set by using the software, either via remote (GSM) or direct (serial cable) connection. Setting functions are: the frequency bands (Service Table), the time schedule (Selective Mode Timing), the measurements reading and recording,...

12-06 - AMS 8060 4/5 Subject to change without notice AMS-8060 Selective Area Monitor Antenna type Triaxial, electric field Frequency range 75 MHz to 3 GHz Dynamic range 0.01 to 300 V/m Overload 600 V/m Resolution 0.01 V/m Sensitivity 0.01 V/m (depending on the band setting) Sampling rate Down to 200 ms (depending on the band setting) 5, 10, 15 and 30 seconds; 1, 2 and 6 minutes (depending on the band setting) Unit V/m Stored values AVG or RMS , Max value Memory size 288 kByte Programmable frequency bands Up to 20 Max. logging before overwriting 50 days @ 6 min storing rate, 5 bands, no Max value...

12-06 - AMS 8060 5/5 Subject to change without notice • Support base and mast • 2 cable ties • Ballast bag • Tools kit • AC/DC power supply / battery charger • RS-232 cable, 2 m • Software diskette • Operating manual • Certificate of calibration Standard accessories supplied with AMS-8060: www.narda-sts.com Field over limit, open case, overheating, low battery, receiver and antenna status. Dimensions Radome: 260 x 740 mm Base 660 x 600 x 30 Battery pack 310 x 240 x 190 Solar panel 500 x 600 x 51 Pole 760 x 60 mm Weight Approx. 27kg (including battery pack and base) Narda Safety Test Solutions...