10-09 - EHP-200 1/7 Subject to change without notice Selective and broadband high frequency field analysis New solution for isotropic measurements in the 9 kHz – 30 MHz range Electric Fields from 0.02 to 1000 V/m Magnetic Fields from 0.6 mA/m to 300 A/m Built-in Frequency Spectrum Analysis Built-in rechargeable battery Optical Fibre connection to PC EHP-200 www.narda-sts.com ELECTRIC AND MAGNETIC FIELD ANALYZER EHP-200

10-09 - EHP-200 2/7 Subject to change without notice The E-H field analyser model EHP-200 was designed for accurate isotropic measurements of both electric and magnetic fields in the 9 kHz - 30 MHz frequency range, with no or minimum perturbation of the fields to be measured. Field sensors and electronic measuring circuitry are fitted into robust housing, only 92 x 92 x 109 mm in size. Separate 3 axis and total values (actual and average) are measured with exceptional flatness and linearity of ±0.3 dB. Results are expressed in V/m, A/m, ìT, mW/cm2, mG, W/m2 and % (percentage of the selected Limit)....

10-09 - EHP-200 3/7 Subject to change without notice EHP-TS application software The recently developed EHP-TS software allows the user to control Narda analyzers such as EHP-50C and EHP-200 through a Personal Computer. The optical cable coming from the analyzer (Max lenght: 40m) can be easily connected to the PC by the provided optical to USB converter USB-OC. If longer distance is required the optional 8053-OC optical to RS232 converter can be used for optical fibre length up to 80m. A user friendly graphical interface includes commands to set all parameters. To understand them better, controls...

10-09 - EHP-200 4/7 Subject to change without notice The 8053-Display Unit The EHP-200 can also be easily operated through the accessory 8053-Display Unit, with the following limitations: • no spectrum display • no wave impedance computing • min. frequency start of: 50 kHz Span setting: • min. span: 300 kHz • start <500 kHz: max. span = 500 kHz • start >500 kHz: max. stop = 30 MHz The following functions are available: Field selection (E, H), 3-axis display, Min-Max-RMS, Logger, Alarms. By the Data logger mode of the 8053-Display Unit, the User can record the measurements and save them in a file...

10-09 - EHP-200 5/7 Subject to change without notice EHP-200 E&H FIELD ANALYSER RF Specifications Electric Field Magnetic Field Magnetic Field AUX Input Mode A Mode B Frequency Range 9 kHz ÷ 30 MHz 9 kHz ÷ 3 MHz 300 kHz ÷ 30 MHz 9 kHz÷30 MHz Measurement Range @ 10 kHz RBW 0.1 ÷ 1000 V/m 0.03 ÷ 300 A/m 3 mA/m ÷ 30 A/m -80 ÷ 0 dBm @ preamp. ON 0.02 ÷ 200 V/m 6 mA/m ÷ 60 A/m 0,6 mA/m ÷ 6 A/m -94 ÷ -14 dBm Dynamic range > 80 dB Sensitivity @ 10 kHz RBW 0,1 V/m 30 mA/m 3 mA/m -80 dBm @ preamp. ON 0,02 V/m 6 mA/m 0,6 mA/m -94 dBm Resolution 0.01 V/m 1 mA/m 0.1 mA/m 0.01 dB Flatness ±0.5 dB@20 V/m ±0.8dB@166mA/m...

10-09 - EHP-200 6/7 Subject to change without notice www.narda-sts.com 8053-Display Unit Specifications Functional Specifications Electric Field Magnetic Field Display Backlight LCD, 72 x 72 mm, 128 x 128 pixels Interfaces Optical Fibre; RS-232 Internal memory 32700 measurements Functions RMS/AVG, 30 s up to 30 min.; alarm 0-100 % f.sc. Data logger modes Sampling (1, 10 to 900 s); data change; over limit; manual; Clock Internal real time clock Internal battery Rechargeable NiMH batteries (5 x 1,2 V) External DC supply 10 ÷ 15 V, about 500 mA Operational and Storage temperature Operating -10 °C...

10-09 - EHP-200 7/7 Subject to change without notice www.narda-sts.com Narda Safety Test Solutions GmbH Sandwiesenstrasse 7 72793 Pfullingen, Germany Phone: +49 (0) 7121-97 32-777 Fax: +49 (0) 7121-97 32-790 E-Mail: [email protected] www.narda-sts.de Narda Safety Test Solutions 435 Moreland Road Hauppauge, NY 11788, USA Phone: +1 631 231-1700 Fax: +1 631 231-1711 E-Mail: [email protected] www.narda-sts.com Narda Safety Test Solutions Srl Via Leonardo da Vinci, 21/23 20090 Segrate (MI) ITALY Phone: +39 02 26.998.71 Fax: +39 02 26.998.700 E-Mail: [email protected] www.narda-sts.it