Catalogs >
Narda Safety Test Solutions GmbH >
7010 All-in-one EMI Receiver

7010 All-in-one EMI Receiver
2Pages

Catalog excerpts

EMI Receiver with built in LISN Main Features • • • • • • • • • • • 7010 Opt.00: 150 kHz to 1 GHz frequency range 7010 Opt.01: 9 kHz to 1 GHz frequency range 7010 Opt.02: 9 kHz to 30 MHz frequency range Precompliance CISPR 16-1-1 Standard Conducted and radiated emission tests Built-in 16 A two Lines Impedance Stabilization Network (LISN) User Port for driving external LISNs Free PES Emission Suite Software with Smart Detector function (*) Direct Analog to Digital conversion up to 30 MHz Robust, compact construction 2 W (140 dBµV) maximum input level without damage 7010 EMI Receiver is an easy-to-use, very flexible equipment suitable for conducted and radiated measurements from 9 kHz up to 1 GHz. Thanks to its built-in 16 A Line Impedance Stabilization Network (LISN), 7010 allows complete conducted emission measurements and characterization of EUTs with no external or additional equipment. The compact and rugged construction makes the 7010 a perfect companion on the workbench of products designers, for in-situ testing, and for laboratory preliminary EMI emission measurements. The 7010 EMI Receiver design is based on an innovative philosophy made possible by using of the latest technology components. It features a fully digital architecture that follows the analogue RF front-end required by the CISPR standards, and exhibits the superior precision and accuracy of a numerical approach with the flexibility and user friendly characteristics typical of a modern instrument. The receiver can be ordered with 3 different frequency ranges: 150 kHz to 1 GHz (7010 opt.00), 9 kHz to 1 GHz (7010 opt.01) and 9 kHz to 30 MHz (7010 opt.02). The upgrade from one version to another can be done at any time. (*) The Smart Detector is an innovative special function implemented in the PMM receivers with the purpose of reducing the test time and increasing the productivity of the lab.

Open the catalog to page 1

EMI Receiver with built in LISN SPECIFICATIONS Frequency range Resolution Frequency accuracy RF Input VSWR 10 dB RF att. 0 dB RF att. Attenuator 150 kHz to 1 GHz (Opt.00) 9 kHz to 1 GHz (Opt.01) 9 kHz to 30 MHz (Opt.02) 10 Hz < 3 ppm Zin 50 Ω, N fem. < 1.2 < 1.2; <1.4 over 30 MHz 0 dB to 35 dB (5dB steps) 0 dB to 50 dB (2dB steps) over 30 MHz Built in Pulse Limiter Max input level (without equipment damage) Sinewave AC Voltage 140 dBμV (2 W) Pulse spectral density 100 dBμV/MHz IF bandwidth 6dB bandwidth 1 (Opt.01 & 02), 3, 10, 30, 100, 300 kHz CISPR 16-1-1 bandwidth (6 dB) 200 Hz (Opt.01 &...

Open the catalog to page 2