Micros
5Pages

SUPER FINE MILL MICROS The main body of the MICROS comprises of a casing, revolving main shaft in the casing and several sub-shafts interlocked with the rotation of the main shaft. Each sub-shaft has a number of ring shaped grinding media. The size of the rings as a grinding media is different depending upon models. The outside diameters are between 25mm and 45mm with thicknesses of several millimeters, (see photo.) The equipment is designed so that each ring can move freely, allowing a small clearance between the outside diameter of the sub-shaft and the inner diameter of the ring. The...

"MICROS" IS A NEWLY DEVELOPED SUPER FINE MILL AND HAS AN ENTIRELY DIFFERENT CONSTRUCTION COMPARED WITH EXISTING MEDIA AGITATING MILLS OR BALL MILLS. THE EQUIPMENT IS A WET TYPE PULVERIZER WHICH CAN OBTAIN SUB-MICRON SIZED PARTICLES WITHIN A SHORT TIME. UNIFORM DISPERSION OF SLURRY MATERIAL CAN ALSO BE DONE BY USE OF THIS INNOVATIVE SUPER FINE MILL FLOW SHEET (Continuous Type) Both BATCH and CONTINUOUS operation of this equipment are passible. Also. EXPLOSION- PROOF and NON-EXPLOSION PROOF models are available. (Lab. Model is NON-EXPLOSION TYPE.) Therefore, it is applicable to the processing...

1. CRUSHABLE INTO SUB-MICRON SIZE PARTICLES Material: Calcium Carta nate Rotational speed 2. PULVERIZED PRODUCT OF SHARP PARTICLE SIZE Material- Cerium Oxide Rotational speed: 3. WIDE RANGE SLURRY DENSITY CAN BE PROCESSED Material: Calcium Rotational speed: FIBROUS MATERIAL IS ALSO EASILY REDUCED Grinding Time 8 (mini Particle Size of Material Rotational speed: WIDE RANGE OF PARTICLE SIZE OF RAW MATERIAL FROM SEVERAL MICRON TO IOC MICRON ARE PROCESSABLE Grinflmg Time 8 (mini Material- Sintered Rotational speed: 6. Suitable for pulverization of laminated structured material sued as graphite...

Due to the merits of the MICROS it is possible to perform grinding tests using a small quantity of sample material. The MICROS-0 is best suited for developing innovative material related to the powder. The equipment is also applicable for both wet and dry processing. Therefore, in addition to pulverization and dispersion of wet method, this equipment is used for basic research in the study of mechanochemical reaction or the mechanical alloying field which is found in the dry powder 1, Compactness and easy operation, 2. Shaft seal section is constructed so that the structure can be sealed...