OVER 75 YEARS OF PRECISION IN CLAMPING TECHNOLOGY DESIGNED TO PROVIDE EVEN MORE FLEXIBILITY MANUAL CLAMPING UNIT TYPE MZ In addition to the advantages of Nann‘s estab- The manual clamping unit type MZ is available lished clamping units, the manual clamping for clamping heads type SK 65, deadlength unit type MZ offers further possibilities. collets 163 E and 173 E, draw-back collets Clamping via clamping heads, deadlength collets, draw-back collets or clamping S03, S04 and S05. Further sizes are available sleeves is made easy within a short time by on request. Contact us to talk about your replacing a few components. All this is now made possible through an optimised power transmission in both axial directions and a double-acting piston. The flexible design and comfortable, efficient mounting are further advantages. Simon Nann GmbH & Co. KG Lindenstraße 8 | D-78583 Böttingen, Germany | Phone: +49(0)7429 392-0 | Fax: +49(0)7429 392-11 | [email protected] | www.nann.de One clamping unit – four clamping options tailormade clamping technology

VARIOUS CLAMPING OPTIONS Fields of application and stop variants High clamping forces and rigidity for flexible and high-precision manufacturing of individual parts in machining centres, drilling and milling centres or in prototype construction: type MZ is perfectly suited for horizontal and vertical use, 5-side processing and machining of chuck components or from rods. Clamping via clamping heads Clamping via deadlength collets The clamping unit type MZ offers the same Standard deadlength collets can be used with functionality as type MSKZ, in addition type type MZ – with stationary stop or...